Tapered roller bearing cup TIMKEN H715310-B

TIMKEN H715310-B is a tapered roller bearing cup reference, within Bearings. Request a quote for H715310-B via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The cup is the removable outer ring of a tapered roller bearing. It is precision ground to form the raceway and is mounted directly in the housing. The TIMKEN H series is identified by the letter H followed by a three-digit number and the suffix -B, which indicates a flanged or ribbed cup design. It is used in assemblies where combined radial and axial loads demand robust and durable support.

The H series designation reads as follows: the letter H indicates the tapered roller cup family, the three-digit number defines the size and proportions of the cone, and the suffix -B indicates a cup with an outer flange or rib. For example, H414210-B and H715310-B share that structure. The number is not a diameter or a direct measurement, but a series code that is combined with the corresponding cone to assemble the complete bearing.

These cups are used in applications with combined loads and moderate misalignment: gear reducers and gearboxes, drive shafts, conveyor rollers, earthmoving equipment, presses and agricultural machinery. In Argentina you will find them in food, cement, mining and oil plants, and in the maintenance of truck and trailer fleets. Also in road and rail equipment that requires high-capacity tapered roller bearings.

To select the correct cup, take into account the cone with which the assembly is built: the cup and the cone are chosen as a unit and are not interchanged between series. Check the sealing type, the recommended axial clearance and the lubrication method. During mounting, the cup is fitted into the housing with adequate interference; it is advisable to heat it slightly to ease seating and avoid damaging the raceway. Alignment between cup and cone is critical for service life.

TIMKEN is a benchmark brand in tapered roller bearings. MR Accesorios Industriales carries this brand and can advise you on interchangeability with other equivalent designations on the market. In general, tapered roller cups are identified by the series code and standardized dimensions; if you need to replace a cup, the code and the dimensions of the assembly are the starting point to find the right equivalent.

If you have the cup or complete bearing part number, send it by WhatsApp to MR Accesorios Industriales. We will quote the TIMKEN reference you need or point you to the compatible alternative. We can also advise you if you are assembling a set with a new cone and cup. Write to us with the part number or model and we will reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.