Split plummer block housing TIMKEN FSNT 211

TIMKEN FSNT 211 is a split plummer block housing reference, within Bearing housings. Request a quote for FSNT 211 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Timken FSNT series split plummer block housings are cast housings that open into two halves to mount and dismount bearings without dismantling the shaft. They are used to support rotating shafts in power transmission equipment, with the advantage of allowing the bearing to be inspected or replaced without moving the machine. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice to choose the housing according to the bearing and the application.

The FSNT designation reads as a family of split plummer block housings: the letters identify the series and the number that follows indicates the size. For example, FSNT 211, FSNT 212 and FSNT 213 correspond to increasing sizes within the same series; FSNT 215, FSNT 216, FSNT 217 and FSNT 218 follow the same logic. The code FSNT 511-609 combines two numbers because the housing accepts more than one shaft or bearing diameter. To choose, send us the complete part number and the bearing you are going to mount.

These housings are used in conveyors, mills, mixers, pumps, fans and process equipment in food, chemical, cement and steel plants. In Argentina they are common in the oilseed industry, in aggregate processing plants and in packaging lines. Their split design simplifies maintenance on equipment where the shaft is long or access is limited, because there is no need to uncouple the transmission to work on the bearing.

To select the housing, take into account the shaft diameter, the bearing type (deep groove, self-aligning or roller) and the load it will support. Mounting requires that both halves seat properly on the base, with the joining bolts tightened to the recommended torque. Bearing lubrication and housing sealing are key to preventing the ingress of dust or moisture. Check the shaft alignment with the housing before final tightening.

Timken FSNT housings are interchangeable with other brands that use the same mounting standard, such as SKF SNL or equivalents. Interchangeability depends on the housing and bearing dimensions, not only on the part number. If you need to replace an existing housing, send us a photo or the part number stamped on the part and we will tell you the compatible alternative. MR Accesorios Industriales supplies the Timken brand and can advise you on the selection.

To request a quote for your Timken FSNT split plummer block housing, write to us on WhatsApp with the complete part number (for example, FSNT 211 or FSNT 511-609) and the quantity you need. If you cannot find the exact part number, tell us the shaft dimensions and the bearing you are going to mount, and we will send you the corresponding option. We reply promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.