TIMKEN AOHX3192G withdrawal sleeve

TIMKEN AOHX3192G is a reference of withdrawal sleeve, within Bushings and sleeves. Request a quote for AOHX3192G via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The TIMKEN withdrawal sleeve is a mounting and dismounting component for spherical roller bearings with tapered bore. It is placed on the shaft and allows the bearing to be removed without damaging the inner ring or the seat. MR Accesorios Industriales sells this line for plants that need clean and repeatable interventions on critical equipment.

The designation of the AOHX…G series is read in blocks: the letters AOHX identify the withdrawal sleeve family, the number that follows indicates the size and the final G indicates the variant with metric thread. The examples AOHX30/500G, AOHX31/500G and AOHX32/500G show how the first numeric block identifies the bearing series, while AOHX3088G, AOHX3092G and AOHX3096G correspond to specific bores. To choose the correct one, the bearing part number and the shaft diameter are the data that define the part.

These sleeves are used in industries in Argentina such as cement, mining, steel, paper, sugar and aggregate processing, where spherical roller bearings work with high loads and misalignment. They also appear in gearboxes, mills, screens, fans and conveyors. In maintenance, they allow the bearing to be removed from the shaft without blows or excessive heating, which extends component life and reduces downtime.

To select the sleeve, verify that the series number and the shaft diameter match the bearing to be dismounted. The thread must be clean and lubricated before threading the hydraulic or mechanical nut. During mounting, check the alignment of the assembly and apply force axially and progressively. If the bearing is sealed, check that the sleeve does not interfere with the lip. Lubrication of the thread and the tapered seat is key to avoid seizing.

Regarding equivalences, withdrawal sleeves from different brands can be interchanged if the series, shaft diameter and thread type match. It is not enough for the part number to be similar: the thread standard and the cone dimensions must be compared. In the local market there are alternatives of European and Asian origin, but interchangeability is always validated with the bearing data sheet. If you have doubts, send us the complete part number and we will indicate the compatible option.

To request a quote for your TIMKEN withdrawal sleeve, write to us by WhatsApp with the exact part number shown on the bearing or on the old sleeve. At MR Accesorios Industriales we reply shortly with the alternative you need. If you cannot find the variant on the site, send us the model and we will handle it. We work in the industrial sector, since 1945, supporting workshops and plants throughout the country.