TIMKEN 932CD tapered roller bearing cup

TIMKEN 932CD is a reference of tapered roller bearing cup, within Bearings. Request a quote for 932CD via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The cup is the outer ring of a tapered roller bearing: the raceway on which the cones roll and which is press-fitted into the housing. In the TIMKEN CD series, the designation identifies the cup by its part number, and it is usually ordered together with the corresponding cone to build the complete assembly. It is used in equipment with combined radial and axial loads, and requires correct alignment and lubrication.

In the CD series designation, the number preceding the letters identifies the cup within the TIMKEN system; the CD suffix corresponds to a family of tapered roller cups. The example 932CD shows that structure: a base number and the CD suffix. The cup is ordered by its part number and is combined with the cone that corresponds to it to form the complete bearing; therefore, when requesting a quote, it is advisable to provide both part numbers.

These cups are found in transmission and conveying equipment: reducers, gearboxes, road machinery shafts, earthmoving equipment, mills, conveyor belts and kiln rollers. In Argentina they appear in maintenance at food, cement and mining plants and in agricultural machinery workshops, where the bearing works under combined load and demands a precise fit in the housing.

To select a cup, you must start from the cone it will work with: internal clearance is set according to the assembly and the application. The cup is mounted with an interference fit in the housing, with a clean seat free of burrs; alignment between cup and cone is critical. Lubrication must be suitable for the speed and temperature, and sealing prevents the entry of contaminants. If the equipment operates with vibration, it is advisable to check the seat and the preload.

Tapered roller cups are interchanged between manufacturers by part number and by dimensions: each brand has its own nomenclature, but the original manufacturer's part number allows the equivalent cup to be located. When there is no exact match, the outer diameter, width and raceway angle are compared. MR Accesorios Industriales will indicate the compatible alternative based on the part number shown on the equipment or on the old part.

If you have the cup part number, the cone part number or both, send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. If the equipment uses a complete assembly, also provide the reducer or shaft model to guide the selection. In Buenos Aires, Argentina, we work with leading brands to solve your replacement needs.