TIMKEN 6230MBMB deep groove ball bearing
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
- Series
- 6000
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read TIMKEN 6230MBMB
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 30Bore
- 150 mm bore: 30 × 5.
- MBMBSuffix
- TIMKEN suffix: it defines the variant (sealing, cage, internal clearance or other features).
6230 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The TIMKEN 6230MBMB bearing has a 150 mm bore, a 270 mm outside diameter and a 45 mm width (150 x 270 x 45 mm).
TIMKEN 6230MBMB is a reference of deep groove ball bearing, within Bearings. Request a quote for 6230MBMB via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
Timken deep groove ball bearings are thin-section components that support moderate radial and axial loads in both directions. They are used in equipment where axial space is limited and high rotational precision is required, such as electric motors, pumps, fans and machine tools. MR Accesorios Industriales sells this line with the MBMB suffix, which identifies the cage and lubrication variant according to the catalog.
The designation of these bearings is read as follows: the base number indicates the series and size, and the suffix MBMB defines construction characteristics such as the cage type and lubricant treatment. For example, 6020MBMB corresponds to a bearing of the 6000 series with that suffix; 6219MBMB combines the base number 6219 with the same ending. Knowing the complete part number is key to ordering the correct replacement.
In Argentine industry they are found in electric motors, gearboxes, centrifugal pumps, fans and transmission equipment. They also appear in machine tools and in applications where a thin-section bearing that supports combined loads is needed. The 6000 series is the lightest section among deep groove ball bearings, which makes it suitable for tight spaces.
To select the correct bearing, take into account the radial and axial load, the rotational speed and the environmental conditions. The seal or shield plates prevent the entry of contaminants; proper lubrication extends service life. During mounting, check the alignment between shaft and housing, and apply the recommended fit to avoid deformation. If the equipment operates with vibrations, consider a reinforced cage.
Deep groove ball bearings are interchangeable between manufacturers if the main dimensions and the type of execution match. When looking for equivalents, compare the complete part number, including suffixes that define cage, sealing and internal clearance. Not all suffixes are equivalent between brands, so it is important to verify the technical specification before replacing.
If you need a bearing from this series, send the part number by WhatsApp to MR Accesorios Industriales. We will quote you promptly and indicate the compatible alternative if necessary. Since 1945 we can advise you on selecting the right component for your equipment.
Dimensions
Boundary dimensions of the basic designation 6230 per ISO 15: 150 x 270 x 45 mm (d x D x B).
- Bore
- 150mm
- Outside diameter (D)
- 270mm
- Width (B)
- 45mm
Same size in SKF and other brands
Pages from other brands with the basic designation 6230: 150 x 270 x 45 mm (d x D x B) per ISO 15.
- Looking for the SKF 6230? We also quote:62306230/C36230/C41 more →
- FAG6230
- NSK62306230 ZZS
- NTN6230
- RKB6230
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the TIMKEN 6230MBMB bearing?
- The TIMKEN 6230MBMB bearing has a 150 mm bore, a 270 mm outside diameter and a 45 mm width (150 x 270 x 45 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6230.
- What does the MBMB suffix mean in these bearings?
- The MBMB suffix identifies a construction variant within the Timken 6000 series, which may include the cage type and the lubricant treatment. To confirm the exact specification, send us the complete part number and we will give you the details.
- How do I request a quote for a 6020MBMB bearing?
- Write to us on WhatsApp with the complete part number, for example 6020MBMB, and we will quote you promptly. If you are not sure of the part number, send us a photo or the main dimensions and we will help you identify it.
- Are they interchangeable with bearings from other brands?
- They can be interchangeable if the main dimensions and the type of execution match. It is important to verify the suffixes, since they define cage, sealing and internal clearance. Ask us about the equivalence and we will advise you.