TIMKEN 592XS tapered roller bearing cup

TIMKEN 592XS is a reference of tapered roller bearing cup, within Bearings. Request a quote for 592XS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The cup is the outer ring of a tapered roller bearing: the raceway on which the rollers run and which is press-fitted into the housing. This TIMKEN part from the XS series is used together with its matching cone to form a separable assembly, which simplifies mounting and replacement in equipment with limited access. MR Accesorios Industriales sells it in Buenos Aires, Argentina, and advises you on identifying the exact part your equipment needs.

The designation of this cup is read from its basic number and the suffix that accompanies it. In the XS series, the four-digit code identifies the raceway geometry, and the final letters indicate design or tolerance variants. For example, 592XS corresponds to a cup from that series; the XS suffix indicates a specific execution within the family. To choose the correct cup, it must be matched with the cone number already mounted on your equipment: both form an inseparable pair and are not replaced separately.

Tapered roller cups are used in applications with combined radial and axial loads, typical of Argentine industry: gear reducers and gearboxes, agricultural machine shafts, earthmoving equipment, conveyors, pumps and industrial fans. They also appear in the automotive and railway sectors, where the robustness of the tapered roller absorbs impacts and moderate misalignment. As a wear part, it is usually replaced together with the cone to restore the assembly's original clearance.

To select the cup, start from the cone number or the complete bearing code shown on the equipment. Check the raceway angle and the overall width, because a cup from another series may look similar but will not fit the existing cone. During mounting, the cup is installed with an interference fit in the housing; it is best to heat it slightly or use a press with a suitable driver, without striking the raceway. Lubrication and sealing are defined by the environment: grease for low speed or oil with seals for continuous bath.

Across brands, tapered roller bearings are identified by basic numbers that often match between manufacturers, but suffix letters change from one company to another. For this reason, interchangeability is confirmed by matching the cone and cup numbers, not just the outer dimension. Send us a photo or the housing dimensions and we will tell you the compatible alternative. MR Accesorios Industriales sells the TIMKEN brand and can guide you on the replacement.

If you need this TIMKEN cup or its matching cone, write to us on WhatsApp with the code 592XS or with the complete bearing number. We will quote you promptly and, if you are looking for another variant of the series, we will source it or offer you the equivalent option. We serve workshops, plants and distributors throughout the country from Buenos Aires, Argentina.