Tapered roller bearing cup TIMKEN 592AX

TIMKEN 592AX is a tapered roller bearing cup reference, within Bearings. Request a quote for 592AX via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The TIMKEN tapered roller bearing cup is the removable outer race of a tapered roller bearing. It is press-fitted into the housing and forms, together with the cone, an assembly that supports combined radial and axial loads. It is used in equipment where power must be transmitted with shafts operating at moderate speeds and high loads, such as gearboxes, conveyor belts, mills and agricultural machinery. MR Accesorios Industriales supplies this line with direct handling of your inquiry.

The designation of these cups is read by the base number and the letter suffix. In the AX series, the examples 362AX and 592AX show that the number identifies the raceway geometry and the suffix AX distinguishes a cup variant within the TIMKEN catalog. The number is not sequential nor does it indicate dimensions by itself: each code corresponds to a specific design of outer diameter, width and contact angle. Therefore, to request a quote, send us the complete code exactly as it appears on the drawing or on the part.

These cups are used in rotating transmission and conveying equipment. In Argentina you will find them in gearboxes, conveyor belts, bucket elevators, flour mills, mixers, presses and agricultural machinery such as seeders and harvesters. Also in kiln rollers, industrial fans and mining equipment. The cone-cup combination allows the bearing to be assembled on site, which simplifies mounting and replacement in equipment where access is limited.

To select a cup, you must start from the complete assembly: the cone and the cup are chosen as a unit. Verify the outer diameter and width of the cup, the contact angle and the sealing type of the assembly. During mounting, the cup is press-fitted into the housing with a suitable gauge; it is advisable to heat the part if the fit is very interferent and to cool the shaft if the cone is mounted. The alignment between both seats is critical: misalignment accelerates wear and generates noise. Lubrication must be the one indicated for the temperature and load of the equipment.

Regarding equivalences, tapered roller bearings are identified by the manufacturer's code and by standardized dimensions. TIMKEN uses its own nomenclature, which does not always coincide with that of other brands. To replace one cup with another of different origin, you must compare outer diameter, width and contact angle, and verify that the cone is compatible. It is not enough for the number to look similar: the cone-cup assembly must maintain the internal clearance specified by the equipment manufacturer.

If you have the cup or assembly code, send it via WhatsApp to MR Accesorios Industriales and we will quote it. We can also guide you if you need to identify the part from measurements or a sample. With more than 80 years in the industry, at MR we know TIMKEN codes and give you a technical answer promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.