Tapered roller bearing cup TIMKEN 52630XB

TIMKEN 52630XB is a tapered roller bearing cup reference, within Bearings. Request a quote for 52630XB via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The TIMKEN XB series tapered roller bearing cup is the removable outer race of a tapered bearing. It is press-fitted into the housing and forms, together with the cone, an assembly that supports combined radial and axial loads. It is used in equipment where clearance must be adjusted and alignment guaranteed, such as reducers, machine shafts and industrial transmissions. MR Accesorios Industriales sells it in Buenos Aires, Argentina, with more than 80 years of experience.

The XB series designation is read from the numeric part number that precedes it: for example, 07210XB and 52630XB correspond to cups of the TSF series. The XB suffix identifies a cup with specific dimensional and radius characteristics within the tapered roller family. To select the correct cup, you must start from the cone number or the complete assembly, because the cup is chosen based on the cone it will work with.

These cups are used in industries such as food, metallurgical, mining and plastics, in equipment such as conveyor belts, mixers, pumps, fans and machine tools. In Argentina, they are commonly found in speed reducers, transmission shafts and support rollers. Their ability to support combined loads makes them suitable for assemblies where the shaft works with radial and axial forces at the same time.

For mounting, keep in mind that the cup is installed in the housing with an interference fit and must be perfectly seated against the shoulder. Adequate lubrication and sealing prevent contamination and extend service life. Axial clearance is adjusted by moving the cone on the shaft or by means of shims; incorrect alignment causes premature wear. Always verify that the cup and cone are of the same series and manufacturer to ensure correct roller contact.

Regarding equivalences, tapered roller cups are identified by their part number, which may vary between manufacturers. To replace a TIMKEN cup with another brand, it is essential to compare outer dimensions, width and contact angle. It is not enough for the part number to be similar. If you need an alternative, at MR Accesorios Industriales we will indicate the compatible option with the exact dimensions of your equipment.

If you are looking for a TIMKEN XB series tapered roller bearing cup, write to us on WhatsApp with the part number or model you need. We will quote it promptly. We can also advise you on selecting the corresponding cone and on mounting. MR Accesorios Industriales, Buenos Aires, Argentina, more than 80 years supporting industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.