Tapered roller bearing cup TIMKEN 382-S

TIMKEN 382-S is a tapered roller bearing cup reference, within Bearings. Request a quote for 382-S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The TIMKEN TS series tapered roller bearing cup is the removable outer race of a tapered roller bearing. It is press-fitted into the housing and forms, together with the cone, an assembly that supports combined radial and axial loads. It is used in equipment where power must be transmitted with shafts operating at different speeds and requiring precise alignment, such as gearboxes, pumps, fans and continuous process machinery.

The TS series designation is read by the base number and the -S suffix. The number identifies the cup within the TIMKEN catalog: for example, 359-S, 382-S, 552-S, 592-S, 612-S, 2523-S, 05185-S and 09194-S are cups of different dimensions. The -S suffix indicates a standard manufacturing variant of the series. Each cup has its corresponding cone; the complete bearing part number combines both. To order the correct part, provide the part number exactly as it appears on the drawing or on the equipment identification plate.

These cups are used in industries in Argentina such as food processing, cement, steel and mining, and in agriculture. They are present in gearboxes, reducers, conveyor belt rollers, mills, mixers, centrifugal pumps and earthmoving equipment. They are also used in heavy machinery maintenance and in engine rebuilding shops. In all cases, the cup works together with the cone and defines the load capacity of the assembly.

To select a TIMKEN TS series cup, take into account the cup outer diameter and width, which must match the housing. Mounting is done with a press or with controlled impact tools, never by striking the race directly. Lubrication of the cone-cup assembly can be grease or oil, depending on the equipment. It is essential to verify shaft alignment and the axial clearance recommended by the equipment manufacturer, because excessive adjustment accelerates wear and insufficient adjustment generates vibration.

TIMKEN tapered roller bearing cups are interchangeable with those of other brands that follow the same standardized dimensions, such as SKF, FAG, NSK or NTN, provided the outer diameter, width and race angle match. In practice, interchangeability is defined by the catalog number and measurements, not by the brand. If the original part number is not available, it can be replaced by an equivalent assembly from another company. MR Accesorios Industriales supplies TIMKEN as an official brand and can indicate the compatible alternative.

MR Accesorios Industriales has more than 80 years in the Argentine industrial market and supplies the TIMKEN brand. If you need a TS series tapered roller bearing cup, send the part number on WhatsApp along with a photo of the part or the drawing. We will quote it promptly. We can also advise you on the corresponding cone and the appropriate mounting tools to avoid damaging the race.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.