TIMKEN 244235-B tapered roller bearing cup

TIMKEN 244235-B is a reference of tapered roller bearing cup, within Bearings. Request a quote for 244235-B via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The TIMKEN TSF series tapered roller bearing cup is the removable outer ring of a tapered roller bearing. It is mounted in the housing and works together with the cone to support combined radial and axial loads. It is used in equipment where force must be transmitted precisely and thrust loads must be supported, such as gearboxes, machine shafts and conveyor rollers. MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The designation of this series is read as the base number followed by the suffix -B, which identifies the cup within the TIMKEN system. For example, references 332-B, 354-B, 362-B and 382-B correspond to cups of different dimensions, and the same applies to other codes in the series. The suffix -B does not indicate dimensions by itself; it is part of the code that must be matched with the corresponding cone to assemble the complete bearing. The TSF series groups these tapered roller cups.

These cups are used in industries in Argentina such as food processing, cement, mining and metallurgy. They are found in gearboxes, conveyor belts, mills, mixers and agricultural machinery. They are also used in material handling equipment and drive shafts where combined loads require a tapered roller bearing. Since the cup is the outer part, it is press-fitted into the housing and receives the thrust from the cone, which rotates with the shaft.

To select the correct cup, start from the complete bearing code or the cone being replaced. The cup and cone must be of the same series and diameter to ensure correct roller contact. During assembly, check the alignment of the housing and seat, and lubricate with the grease or oil recommended for the application. Proper sealing prevents contamination and extends the service life of the assembly. If you have doubts, send us the code and we will indicate the compatible alternative.

Regarding equivalences, tapered roller bearings are identified by designation systems that may vary between manufacturers. A TIMKEN cup may have equivalents in other brands, but interchangeability depends on the dimensions and tolerances of the cone-cup assembly. A similar number is not enough: outer diameter, width and contact angle must be compared. Therefore, for replacements, the safest approach is to request a quote with the exact code or with the dimensions of the original bearing.

If you need a TIMKEN TSF series tapered roller cup, write to us on WhatsApp with the code shown on your equipment or on the old part. At MR Accesorios Industriales we will quote it and, if applicable, offer you the compatible alternative. We serve industries throughout the country from Buenos Aires, Argentina, in bearings and power transmission.