Product page
Sealing washers SKF Z 008 F
- Manufacturer Part Number
- Z 008 F
- Brand
- SKFOfficial brand
- Category
- Seals
- Subcategory
- Sealing washers
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF Z 008 F is a sealing washers reference, within Seals. Request a quote for Z 008 F via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
SKF Z F series sealing washers are axial sealing elements mounted on shafts or in housings to retain lubricant and block the ingress of contaminants. They are made of elastomers resistant to oils and greases, and are used in assemblies where axial space is limited. MR Accesorios Industriales carries this line as an official brand, with more than 80 years of experience in industrial distribution.
The Z F series designation reads with the letter Z, a three-digit number that identifies the size, and the F suffix that distinguishes the profile or material. For example, Z 005 F, Z 006 F, Z 008 F, Z 009 F and Z 010 F cover small diameters, while Z 201 F, Z 202 F and Z 203 F correspond to larger sizes. The number does not indicate the diameter directly, so it is advisable to verify the size with the drawing or the original part.
These washers are used in gearboxes, pumps, electric motors, transmission equipment and agricultural or road machinery. In Argentina they are common in the maintenance of mills, conveyor belts and process equipment, where axial sealing prevents oil leaks and the entry of dust or water. They are also used as a secondary seal in bearings and bushings.
To select the correct washer, consider the shaft or housing diameter, the width of the available space and the chemical compatibility with the lubricant. Installation must be done with the sealing face oriented toward the fluid to be retained, without twisting or impacts that damage the lip. Prior lubrication of the lip and careful alignment extend the service life of the seal.
SKF sealing washers can be interchanged with equivalent products from other brands, but the equivalence depends on the dimensions and material. It is not enough for the code to be similar: you must compare diameters, thickness and type of elastomer. If you have doubts, contact us with the exact size and we will help you find the right option.
To request a quote for SKF Z F series sealing washers, send the full part number via WhatsApp to MR Accesorios Industriales. If you do not have it at hand, send us the shaft and housing dimensions, and we will advise you with no obligation.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the F suffix mean in Z F washers?
- The F suffix identifies a profile or material variant within the Z series. It does not change the nominal size, but it does change the type of elastomer and its resistance. To confirm equivalence, always verify the full part number and dimensions.
- How do I choose the correct washer size?
- You need the shaft or housing diameter, the width of the space and the type of lubricant. With that data, compare the SKF part number or contact us on WhatsApp. The series number alone is not enough, because it can vary by manufacturer.
- Are SKF washers compatible with other brands?
- They can be interchangeable if dimensions and material match. There is no universal equivalence table, so it is best to verify size by size. At MR we help you compare with the original part or drawing.