Y-bearing (insert bearing) SKF YSP 212-207 SB-2FU/HT22

SKF YSP 212-207 SB-2FU/HT22 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for YSP 212-207 SB-2FU/HT22 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Y-bearing is an insert with an extended inner ring and a set screw locking system, designed to be mounted on shafts and housed in split or pillow block housings. The SKF YSP SB series is used in equipment that requires a compact, sealed unit that is easy to replace. MR Accesorios Industriales supplies this line for industrial and agricultural applications.

The YSP SB series designation is read in blocks. The letters YSP identify the insert with an extended inner ring and set screw locking. The number that follows indicates the shaft diameter in inches and, when a second number separated by a hyphen appears, it corresponds to the housing diameter. The SB suffix indicates the sealing type, and the FU and HT variants add the locking configuration and the heat treatment of the outer ring. For example, YSP 212-207 SB-2FU/HT22 combines a 2 1/8" shaft with a 2 7/16" housing and special sealing.

These bearings are used in belt conveyors, grain elevators, mixers, mills and material handling equipment. In Argentina they are common in grain processing plants, feedlots, meat packing plants and industrial facilities where dust, moisture or washdown require sealed units. They also appear in road and agricultural machinery that works outdoors, where quick insert replacement avoids disassembling the entire housing.

To select correctly, check the shaft and housing diameters before ordering. The SB sealing is designed to retain grease and block contaminants; if the environment has pressurized water, it is worth evaluating variants with greater protection. Internal clearance and lubrication are defined at the factory, but mounting must be done on a shaft free of burrs and with the housing aligned. Tighten the set screws onto the flat face of the shaft and verify that the outer ring seats without forcing.

Y-bearings are interchangeable between brands if the shaft dimensions, the housing and the locking type match. It is not enough for the part number to be similar: the outside diameter, the overall width and the position of the holes must be compared. SKF is an official brand that MR supplies, and we can advise you on equivalents with other lines available on the market. Send us the full part number on WhatsApp and we will confirm the alternative that best fits your equipment.

At MR Accesorios Industriales we have worked with bearings, housings and power transmission since 1945. If your equipment uses a YSP SB insert, write to us on WhatsApp with the part number engraved on the bearing or with the shaft and housing measurements. We will reply with the available option and arrange the quote.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.