SKF YET 208 y-bearing (insert bearing)

SKF YET 208 is a reference of y-bearing (insert bearing), within Bearings. Request a quote for YET 208 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF YET series Y-bearing (insert) is a ball bearing with an extended inner ring and set screw locking system. It is used in applications requiring quick and secure mounting on shafts, especially in power transmission equipment. Its design compensates for misalignment and simplifies maintenance. MR Accesorios Industriales carries this line as part of its extensive bearing catalog.

The YET designation identifies Y-bearings with an extended inner ring and set screw locking. The number that follows indicates the bore diameter: for example, YET 203 has a 17 mm bore, YET 204 has 20 mm and YET 205 has 25 mm. Suffixes with a hyphen, as in YET 203-008, indicate special bore sizes, in this case 12.7 mm (1/2 inch). The slash in YET 203/15 indicates a 15 mm diameter. These codes allow quick identification of the required size.

These bearings are used in a wide variety of industrial and agricultural equipment in Argentina. They are common in conveyors, grain elevators, food industry machinery, bottling equipment, fans and transmission systems. Their ability to support moderate radial and axial loads makes them suitable for applications where the shaft rotates at medium speeds. They are also used in split plummer block housings and take-up frames, facilitating field mounting and dismounting.

To select the right Y-bearing, consider the shaft diameter, radial and axial loads, and environmental conditions. Verify that the set screw locking system is compatible with the shaft and that lubrication is adequate. During mounting, ensure correct alignment to avoid additional stresses. If the environment has dust or moisture, consider bearings with additional seals. The YET series is designed to operate with normal internal clearance.

SKF YET series Y-bearings are interchangeable with those of other brands that follow the same dimensional designation. When replacing a bearing, compare the main dimensions: bore diameter, outer diameter and width. Also check the locking type and seal arrangement. In general, Y-bearings with extended inner ring and set screws from different brands can be substituted for each other if the dimensions and locking method match. Always consult the technical specifications.

If you need a quote for an SKF YET series Y-bearing (insert), send the complete code via WhatsApp to MR Accesorios Industriales. Our technical team will help you identify the correct reference and answer any questions about mounting or applications. At MR Accesorios Industriales we are here to advise you.