Y-bearing (insert bearing) SKF YEL 208-106 VAC-F

SKF YEL 208-106 VAC-F is a y-bearing (insert bearing) reference, within Bearings. Request a quote for YEL 208-106 VAC-F via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF YEL VAC-F series Y-bearing is an insert with an extended inner ring and set screw locking, designed to be mounted in split or pillow block housings. It is used in equipment where ease of mounting and sealing against contaminants are key, such as conveyor belts, fans or agricultural machinery. MR Accesorios Industriales carries this line and advises you on choosing the correct variant for your application.

The YEL VAC-F series designation is read in parts. The letters YEL identify a Y-bearing with an extended inner ring and screw locking; VAC indicates the type of sealing, with a contact lip that retains grease and blocks dust; and the final F indicates an execution with additional manufacturing features. A specific example is the YEL 208-106 VAC-F, where the number 208 defines the bearing size and the suffix 106 the bore size in inches. For other sizes, the logic is the same: the base number and the bore suffix change.

This type of Y-bearing is used in industries with rotating shafts under moderate loads and a need for quick mounting. In Argentina it is common to see it in conveyor belts at aggregate plants, in industrial fans, in agricultural machinery such as seeders and harvesters, and in process equipment at food plants. It also appears in cold storage conveyors and packaging lines, where the VAC sealing helps maintain lubrication and prevent the ingress of particles.

To select the correct bearing, take into account the shaft diameter, the type of load and the environmental conditions. Set screw locking requires the shaft to have the appropriate hardness and finish; a soft shaft or one with burrs can loosen the screws. The VAC-F sealing is designed for environments with moderate dust or humidity, but if there are frequent washdowns or direct exposure to water, a more robust seal should be evaluated. Factory lubrication is usually sufficient for most cases, although in high-temperature or high-speed applications the type of grease must be reviewed. Alignment between housings is critical to avoid parasitic axial loads.

As for equivalents, Y-bearings with screw locking and contact sealing from other brands can be interchanged if the main dimensions match: bore diameter, outside diameter and overall width. However, the series number alone is not enough; the type of sealing, the locking system and the tolerances must be verified. Other brands' codes do not always correspond one to one, so the safest approach is to compare the actual measurements or consult a specialist. MR Accesorios Industriales can help you with that comparison.

If you need this SKF Y-bearing, send us the complete part number on WhatsApp. At MR Accesorios Industriales we will quote the exact variant. We can also advise you if you have doubts about interchangeability with other brands or about mounting it on your equipment. Write to us and we will reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.