Y-bearing (insert bearing) SKF YAT 205-014

SKF YAT 205-014 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for YAT 205-014 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF Y-bearing YAT series is an insert with a spherical outer ring and set screws to secure the shaft. It is used in equipment with moderate loads and low or medium speeds, where mounting and dismounting without special tools is required. It is common in conveyors, fans and agricultural machinery. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct size.

The designation YAT identifies a series 2 Y-bearing with a spherical outer ring and two set screws on the inner ring. The number that follows indicates the bore diameter: for example, YAT 203 has 17 mm, YAT 204 20 mm, YAT 205 25 mm and YAT 206 30 mm. Suffixes with a hyphen, such as YAT 203-008 or YAT 205-100, indicate special or inch sizes: the numeric suffix relates to the diameter in inches or to width variants. Always check the complete designation to avoid confusing sizes.

These bearings are used in belt conveyors, bucket elevators, fans, mixers and agricultural equipment. In Argentina they are common in food plants, cement plants and metalworking workshops. Their spherical outer ring compensates for small misalignments when mounted in split plummer block housings or take-up frames. Set screw fixing makes assembly easier on unmachined shafts, which speeds up field maintenance.

To select a YAT, check the shaft diameter and the housing type. The standard seal is double-lip with metal protection; if there is dust or water, consider variants with more robust seals. Factory lubrication is usually lithium grease, but in humid environments periodic relubrication is advisable. During mounting, align the housing and tighten the set screws with a torque wrench according to the recommended torque to avoid deformation.

Regarding equivalents, other manufacturers use their own nomenclature for similar Y-bearings, such as UC, GYE or YAR. There is no exact correspondence between codes, because tolerances, seals or fixing systems change. If you need to replace a Y-bearing, compare the critical dimensions: bore diameter, outer diameter, width and fixing type. MR Accesorios Industriales can help you identify the right reference.

To request a quote, send us the complete bearing code, for example YAT 205-014, and the quantity you need. If you do not have it at hand, send us the shaft and housing dimensions. Our technical team replies via WhatsApp with the alternative that best suits your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.