Y-bearing (insert bearing) SKF YAR 209-2DW/AG

SKF YAR 209-2DW/AG is a y-bearing (insert bearing) reference, within Bearings. Request a quote for YAR 209-2DW/AG via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF Y-bearing of the YAR …DW/AG series is an insert with an extended inner ring and set screw locking, designed to be mounted in split plummer block or flanged housings. It is used in equipment with rotating shafts where firm and simple fastening is required. Its design compensates for small misalignments and supports combined loads. MR Accesorios Industriales carries this line as part of its catalog of bearings for industrial applications.

The designation YAR …DW/AG is interpreted as follows: YAR identifies the series of inserts with extended inner ring and set screw locking; # represents the size, which in the examples ranges from 204 to 210; 2DW indicates double contact seal; AG indicates a variant with specific characteristics, such as the type of grease or internal clearance. The examples YAR 204-2DW/AG, YAR 206-2DW/AG and YAR 210-2DW/AG show how the code changes according to the shaft diameter. This nomenclature allows the main characteristics of the bearing to be identified quickly.

These bearings are used in a wide variety of industrial equipment in Argentina. They are found in conveyors, mixers, fans, pumps, mills and agricultural machinery. They are also present in packaging lines, conveyor belts and transmission systems. Their design with an extended inner ring facilitates mounting on shafts and their set screw locking ensures reliable fastening in applications with moderate vibrations. They are common in food, chemical and construction materials plants.

To select the right bearing, take into account the shaft diameter, radial and axial loads, and environmental conditions. The 2DW seal protects against dust and moisture, so it is suitable for contaminated environments. Factory lubrication is sufficient for most applications, but in cases of high temperatures or high speeds a special grease may be required. During mounting, ensure correct alignment between the shaft and the housing to avoid additional stresses. Locking by set screws must be done with the recommended torque to avoid deformation.

Regarding equivalents, SKF Y-bearings can be interchanged with those of other brands that follow the same dimensional designation, such as the YAR, YET, YEL or UC series. However, it is important to verify the critical dimensions and tolerances, since there may be differences in the seal or internal clearance. Always check the technical specifications before replacing one bearing with another of a different brand. MR Accesorios Industriales can advise you on compatibility with your equipment.

If you need a quote for an SKF Y-bearing of the YAR …DW/AG series, send us the complete code on WhatsApp. At MR Accesorios Industriales we help you identify the correct part and resolve your technical questions. With more than 80 years of experience, we are your reliable partner for bearings and power transmission.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.