SKF YAR 208-2RF/W64 y-bearing (insert bearing)

SKF YAR 208-2RF/W64 is a reference of y-bearing (insert bearing), within Bearings. Request a quote for YAR 208-2RF/W64 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF Y-bearing of the YAR series is an insert with an extended inner ring and set screw locking, designed to be mounted in split or pillow block housings. It is used in equipment with rotating shafts where a simple, easy-to-maintain bearing unit is required. Its 2RF seal offers protection against contaminants, and the W64 variant indicates a special treatment for specific applications.

The designation YAR …RF/W… is interpreted as follows: YAR identifies the insert series with extended inner ring and two set screws for shaft locking. The central number (for example, 208 or 209) indicates the bearing size according to shaft diameter. The suffix 2RF indicates the seal type: double rubber lip with metal reinforcement, which retains grease and blocks contaminants. W64 corresponds to a variant with special treatment, which may be for high temperatures or particular conditions. The examples YAR 208-2RF/W64 and YAR 209-2RF/W64 show this structure.

These bearings are used in a wide variety of industrial equipment in Argentina: conveyors, mixers, fans, pumps, mills, conveyor belts and agricultural machinery. They are common in food, cement, mining and aggregate processing plants, where the environment can be dusty or humid. Their design allows mounting in split or pillow block housings, facilitating replacement and alignment. MR Accesorios Industriales sells this SKF line for the Argentine market.

To select the correct Y-bearing, take into account the shaft diameter, radial and axial loads, and environmental conditions. The 2RF seal is suitable for environments with moderate dust or humidity; if there is exposure to liquids, consider additional seals. Factory lubrication is usually lithium grease, but verify compatibility if you are going to relubricate. During mounting, ensure the shaft is clean and free of burrs, and tighten the set screws with a torque wrench to the recommended torque. Housing alignment is critical to avoid additional loads.

Regarding equivalences, SKF Y-bearings can be interchanged with those of other brands that follow the same dimensional standard. The YAR designation is specific to SKF, but other manufacturers use similar nomenclatures for inserts with extended ring and screw locking. Always verify the critical dimensions: shaft diameter, total width, outer diameter and seal type.

If you need this SKF Y-bearing, send us the complete code via WhatsApp to MR Accesorios Industriales. We will quote you promptly and advise you so you choose the correct option according to your application.