Y-bearing (insert bearing) SKF YAR 207-104-2LPW/SS

SKF YAR 207-104-2LPW/SS is a y-bearing (insert bearing) reference, within Bearings. Request a quote for YAR 207-104-2LPW/SS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF YAR series Y-bearing is an insert with extended inner ring and set screw locking, designed to be mounted in split plummer block or flanged housings. It is used in equipment requiring a simple, robust and easy-to-replace bearing unit. Its sealed construction and the stainless steel option (suffix /SS) make it suitable for humid environments or frequent washdowns.

The designation YAR identifies the series of inserts with extended inner ring and two set screws to lock the shaft. The number that follows (204, 205, 206, etc.) indicates the size: the higher the number, the larger the shaft diameter and external dimensions. Suffixes provide key information: 2LPW indicates double low-friction seal, and /SS indicates stainless steel execution. For example, YAR 204-2LPW/SS is an insert for a 20 mm shaft with double seal and stainless steel; YAR 206-103-2LPW/SS corresponds to a 1.3/16" shaft in stainless steel. Knowing these codes allows you to order the exact replacement.

These bearings are used in conveyors, belts, elevators, mixers, industrial laundry equipment, food and beverage plants, and generally in any machine with rotating shafts requiring a simple and reliable support. In Argentina, they are common in the food and chemical industries and in plants where hygiene requires frequent washdowns, since the stainless steel version resists corrosion. They are also found in agricultural equipment and packaging lines.

To select the correct insert, consider the shaft diameter, the type of load (radial, axial or combined) and environmental conditions. The YAR series with 2LPW seal offers good protection against dust and moisture. During mounting, verify that the shaft is clean and free of burrs, and tighten the set screws with the appropriate wrench to prevent the inner ring from turning on the shaft. Correct lubrication and careful alignment extend service life. If the environment is corrosive, choose the /SS variant.

Regarding equivalences, SKF YAR inserts are interchangeable with other brands that manufacture Y-bearings with the same shaft diameter and locking configuration. Always verify critical dimensions: bore diameter, overall width and distance between screws. Not all brands use the same nomenclature, but codes based on shaft diameter (204, 205, etc.) usually match. For a safe replacement, compare the dimensions of the original bearing with those of the new one.

MR Accesorios Industriales distributes the SKF brand as part of its bearing line. If you need a quote for a YAR insert, send us the complete code via WhatsApp and we will respond promptly. We can also advise you if you have doubts about the designation or the right version for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.