SKF W 6202-2RS2/C3VT127 stainless steel deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Stainless steel deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF W 6202-2RS2/C3VT127
- W 62Series
- Stainless steel deep groove ball bearings, W 62 series. For the same bore, each series has a different outside diameter and width.
- 02Bore
- 15 mm bore: code 02 stands for 15 mm by standard.
- 2RS2/C3VT127Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
W 6202 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF W 6202-2RS2/C3VT127 bearing has a 15 mm bore, a 35 mm outside diameter and a 11 mm width (15 x 35 x 11 mm).
SKF W 6202-2RS2/C3VT127 is a reference of stainless steel deep groove ball bearing, within Bearings. Request a quote for W 6202-2RS2/C3VT127 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF stainless steel deep groove ball bearing is a component designed to support radial and axial loads in corrosive or humid environments. Its stainless steel construction and specific suffixes make it suitable for applications where corrosion resistance is critical. MR Accesorios Industriales supplies this line as a brand, with technical advice to select the right variant.
The designation of this series is interpreted as follows: the prefix W indicates that the bearing is made of stainless steel. Then, the basic number (for example, 6202 or 6204) defines the size and load capacity according to ISO standards. The suffixes -2RS2 indicate rubber seals on both sides, and /C3 indicates an internal radial clearance greater than standard. The combination VT127 corresponds to a special lubrication and treatment for specific conditions. The examples W 6202-2RS2/C3VT127 and W 6204-2RS2/C3VT127 show how this nomenclature is applied.
These bearings are used in the food, chemical, pharmaceutical and water treatment industries, where exposure to cleaning liquids or humid environments can affect conventional bearings. They also appear in packaging equipment, pumps, fans and conveyors that operate in frequent washdown areas. In Argentina, they are common in plants that require strict hygiene and in marine or coastal applications where corrosion is a critical factor.
To select correctly, take into account the sealing: -2RS2 offers protection against dust and splashes, but do not immerse the bearing. The C3 clearance is useful when there are thermal differences between shaft and housing. The VT127 lubrication comes pre-applied from the factory; do not mix it with other lubricants. During mounting, ensure precise alignment and avoid impacts that could damage the seals or the balls. Check the operating conditions to choose the right variant.
Regarding equivalences, other manufacturers may offer stainless steel bearings with similar designations, but the suffixes and treatments do not always match. Do not assume that a part number from another brand is identical: always verify the dimensions and lubrication conditions. Interchangeability depends on meeting the same load, speed and environment requirements. If you need to replace an existing bearing, the best approach is to compare the technical specifications and consult a specialist.
To request a quote or resolve questions about this reference, send the complete part number on WhatsApp to MR Accesorios Industriales. We advise you so you can choose the right option for your application.
Dimensions
Boundary dimensions of the basic designation W 6202 per ISO 15: 15 x 35 x 11 mm (d x D x B).
- Bore
- 15mm
- Outside diameter (D)
- 35mm
- Width (B)
- 11mm
Frequently Asked Questions
- What are the dimensions of the SKF W 6202-2RS2/C3VT127 bearing?
- The SKF W 6202-2RS2/C3VT127 bearing has a 15 mm bore, a 35 mm outside diameter and a 11 mm width (15 x 35 x 11 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation W 6202.
- What does the VT127 suffix mean on this bearing?
- VT127 indicates a special lubrication and treatment defined by SKF for specific applications, generally related to corrosion resistance or temperature conditions. It is not a universal code; check the data sheet for exact details.
- Can I replace a standard bearing with this stainless steel one?
- Yes, as long as the dimensions and clearance are compatible. Stainless steel offers better corrosion resistance, but verify the load capacity and lubrication conditions. Contact us with the original part number to confirm the equivalence.
- Is this bearing suitable for high-pressure water washdowns?
- The
-2RS2sealing protects against splashes and dust, but it is not designed for immersion or direct high-pressure washdowns. For those conditions, evaluate options with more robust seals or consult our technical team.