SKF W 6200-2RS1/GFJ/R806 stainless steel deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Stainless steel deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF W 6200-2RS1/GFJ/R806
- W 62Series
- Stainless steel deep groove ball bearings, W 62 series. For the same bore, each series has a different outside diameter and width.
- 00Bore
- 10 mm bore: code 00 stands for 10 mm by standard.
- 2RS1/GFJ/R806Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
W 6200 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF W 6200-2RS1/GFJ/R806 bearing has a 10 mm bore, a 30 mm outside diameter and a 9 mm width (10 x 30 x 9 mm).
SKF W 6200-2RS1/GFJ/R806 is a reference of stainless steel deep groove ball bearing, within Bearings. Request a quote for W 6200-2RS1/GFJ/R806 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The stainless steel deep groove ball bearing SKF is a component designed to support radial and axial loads in applications where corrosion is a challenge. Its stainless steel construction offers oxidation resistance, which makes it suitable for humid environments or environments with chemical agents. It is used in equipment that requires frequent cleaning or exposure to the weather, such as the food, pharmaceutical or naval industry. At MR Accesorios Industriales we sell this SKF line, a brand we sell, and we advise you so you choose the right sealing and lubrication for your application.
The designation of this series combines letters and numbers that indicate specific characteristics. The initial letter W indicates that the bearing is made of stainless steel. The number that follows, as in W 6200-2RS1/GFJ/R806, corresponds to the size within series 62, which is the medium-section one. The suffixes 2RS1 indicate double rubber seal, GFJ refers to the food-grade grease type, and R806 identifies a particular manufacturer specification. Knowing these codes allows you to select the exact variant for your equipment.
This type of bearing is used in industries where hygiene and corrosion resistance are critical. In Argentina, it is commonly found in food packaging lines, dairy processing equipment, beverage machines, and in the pharmaceutical industry. It is also used in naval applications, industrial laundries and water treatment systems. Its ability to withstand frequent washdowns with cleaning agents makes it a reliable option for demanding environments.
When selecting a stainless steel bearing, take into account the type of sealing: the double rubber seal protects against the entry of contaminants and lubricant loss, but it can increase friction torque. GFJ lubrication is suitable for incidental food contact, although you should always verify local regulations. During assembly, ensure correct alignment and avoid impacts that could damage the seals. Cleaning the shaft and housing before installation prolongs bearing service life.
Regarding equivalences, other manufacturers offer stainless steel bearings with similar designations, but the suffixes may vary. For example, the SKF 2RS1 seal is equivalent to 2RS in other brands, and food-grade greases have codes specific to each manufacturer. Always verify the critical dimensions and operating conditions before interchanging one bearing for another. If you have doubts, consult us with the complete part number and we will help you find the best option.
To request a quote for the bearing you need, send us the complete part number by WhatsApp. At MR Accesorios Industriales we provide technical advice so you select the right stainless steel bearing for your application. Write to us and we will reply shortly.
Dimensions
Boundary dimensions of the basic designation W 6200 per ISO 15: 10 x 30 x 9 mm (d x D x B).
- Bore
- 10mm
- Outside diameter (D)
- 30mm
- Width (B)
- 9mm
Frequently Asked Questions
- What are the dimensions of the SKF W 6200-2RS1/GFJ/R806 bearing?
- The SKF W 6200-2RS1/GFJ/R806 bearing has a 10 mm bore, a 30 mm outside diameter and a 9 mm width (10 x 30 x 9 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation W 6200.
- What does the 2RS1 suffix mean on this bearing?
- The 2RS1 suffix indicates that the bearing has double rubber sealing on both sides. This protects against the entry of contaminants such as dust and water, and retains lubrication. It is ideal for humid environments or environments with particles, although it can slightly increase friction.
- Is this bearing suitable for food contact?
- The GFJ designation corresponds to a food-grade grease, which allows its use in applications where there may be incidental food contact. However, always verify local regulations and the specific conditions of your process to ensure compliance.
- Can I replace a stainless steel bearing with a chrome steel one?
- It is not advisable if the environment is corrosive. Stainless steel offers oxidation resistance that chrome steel does not have. Although the dimensions may match, service life would be drastically reduced in the presence of humidity or chemical agents.