SKF W 6000-2Z/VT127 stainless steel deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Stainless steel deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF W 6000-2Z/VT127
- W 60Series
- Stainless steel deep groove ball bearings, W 60 series. For the same bore, each series has a different outside diameter and width.
- 00Bore
- 10 mm bore: code 00 stands for 10 mm by standard.
- 2Z/VT127Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
W 6000 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF W 6000-2Z/VT127 bearing has a 10 mm bore, a 26 mm outside diameter and a 8 mm width (10 x 26 x 8 mm).
SKF W 6000-2Z/VT127 is a reference of stainless steel deep groove ball bearing, within Bearings. Request a quote for W 6000-2Z/VT127 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF stainless steel deep groove ball bearing is a component designed to support radial and axial loads in both directions, manufactured in stainless steel to resist corrosion and allow frequent washdowns. It is used in applications where moisture, chemicals or sanitary environments are present, such as food processing equipment, the pharmaceutical industry and machinery exposed to the weather. Its compact and versatile design makes it suitable for a wide range of speeds and operating conditions.
The designation of these bearings follows a clear scheme: the prefix W indicates that the ring and rolling elements are made of stainless steel. Then comes the series number, which can be from series 60, 62, 63, 619, etc., and which defines the main dimensions. The suffixes -2Z or -2RS indicate the type of sealing: 2Z corresponds to two shield plates and 2RS to two elastomer seals. The slash followed by VT and a number, as in W 625-2Z/VT378, identifies the type of grease or special lubricant. For example, W 6000-2Z/VT127 combines a light series with metal shielding and a particular grease.
These bearings are used in industries where corrosion is a constant risk. In Argentina, they are common in food and beverage plants, where equipment is washed daily with water and detergents. They are also found in the pharmaceutical industry, in packaging and filling machines, and in marine or coastal applications. Laboratory equipment, pumps, fans and conveyors operating in humid environments benefit from the resistance of stainless steel. Their ability to withstand washdowns without rusting makes them ideal for sanitary processing areas.
When selecting a stainless steel bearing, take into account the type of sealing: 2Z offers protection against dust and dirt, but does not retain liquids; 2RS provides a tighter seal, suitable for environments with splashes. Lubrication is critical: the grease indicated by the VT suffix is formulated for compatibility with stainless steel and the operating conditions. During mounting, ensure correct alignment between shaft and housing to avoid additional loads. Avoid striking the rings and use suitable tools so as not to damage the seals or the cage.
As for equivalences, SKF stainless steel bearings can be interchanged with those of other brands that follow the same standardized dimensions. The W designation is specific to SKF for stainless steel, but other manufacturers use their own nomenclatures. It is essential to verify the critical dimensions (bore, outside diameter and width) and the type of sealing before replacing. Lubricant suffixes may vary between manufacturers, so it is recommended to consult the technical specifications. At MR Accesorios Industriales we can advise you on interchangeability.
If you need a stainless steel deep groove ball bearing for your application, at MR Accesorios Industriales we help you find the right one. Send us the complete code via WhatsApp, for example W 6202-2Z/VT378, and we will quote you promptly. We work with the leading brands to offer you reliable solutions.
Dimensions
Boundary dimensions of the basic designation W 6000 per ISO 15: 10 x 26 x 8 mm (d x D x B).
- Bore
- 10mm
- Outside diameter (D)
- 26mm
- Width (B)
- 8mm
Frequently Asked Questions
- What are the dimensions of the SKF W 6000-2Z/VT127 bearing?
- The SKF W 6000-2Z/VT127 bearing has a 10 mm bore, a 26 mm outside diameter and a 8 mm width (10 x 26 x 8 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation W 6000.
- What does the VT suffix mean in the designation?
- The VT suffix followed by a number identifies the type of grease or special lubricant with which the bearing is pre-lubricated. Each VT code corresponds to a specific formulation, suitable for different temperature conditions and compatible with stainless steel.
- What is the difference between 2Z and 2RS?
- 2Z indicates two metal shield plates, which protect against dust and dirt but do not retain liquids. 2RS corresponds to two elastomer seals, which offer greater sealing against splashes and humid environments.
- Can I replace an SKF bearing with another brand?
- Yes, as long as the main dimensions (bore, outside diameter and width) and the type of sealing match. The W designation is specific to SKF, but other manufacturers offer stainless steel equivalents. Always verify the technical specifications.