Product page
Y-bearing (insert bearing) SKF UC 207-35 A
- Manufacturer Part Number
- UC 207-35 A
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
Other brands in this family
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF UC 207-35 A is a y-bearing (insert bearing) reference, within Bearings. Request a quote for UC 207-35 A via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF UC A series Y-bearing is an insert with an extended inner ring and set screws, designed to be mounted in split or pillow block housings. It is used in equipment where ease of mounting and sealing are key, such as conveyor belts, mills and agricultural machinery. Its design compensates for slight misalignment and simplifies maintenance. MR Accesorios Industriales carries this line with technical advice so you can choose the correct part number.
The UC … A designation is read as follows: UC identifies the series of Y-bearings with extended inner ring and set screws; the central number (for example, 207 in UC 207-35 A) indicates the nominal bore diameter in inches or millimeters depending on the variant; the suffix A indicates an execution with a specific seal. In the example, UC 207-35 A corresponds to a bearing with a 35 mm bore. To request a quote, provide the complete part number exactly as it appears on the equipment plate or manual.
These bearings are used in conveying and process equipment: conveyor belts, bucket elevators, mills, mixers, screens and agricultural machinery. In Argentina, they are common in food plants, cement plants, quarries and agro-industrial facilities. Their mounting in split housings makes replacement easier without disassembling complete shafts, which reduces downtime. MR Accesorios Industriales carries them for replacement and new projects.
To select the right Y-bearing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The seal must be chosen according to exposure to dust, water or chemical agents. When mounting, verify the alignment of the housing and tighten the set screws with the recommended torque wrench. The initial lubrication comes from the factory; in service, follow the equipment maintenance plan. Avoid striking the inner ring during mounting.
As for equivalences, UC A series Y-bearings from different brands can be interchanged if the main dimensions and seal type match. However, always verify the tolerances and the locking system, because they may vary between manufacturers. For replacements, the safest approach is to compare the original part number and the shaft and housing dimensions. If you have doubts, consult us with a photo or the code engraved on the bearing.
To request a quote for your SKF UC A series Y-bearing, send the complete part number on WhatsApp to MR Accesorios Industriales. If you do not have it at hand, send us the shaft and housing measurements, and we will help you identify it. Our technical team advises you so that the replacement is the correct one and the equipment keeps running without setbacks.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- How do I identify the Y-bearing I need?
- Look for the code engraved on the bearing or on the housing. If you cannot find it, measure the shaft diameter and the housing width. With that data and a photo, we can help you identify the right UC A series.
- What does the A suffix mean in the UC series?
- The A suffix indicates an execution variant, generally associated with the seal type or a dimensional modification. To confirm the exact equivalence, it is necessary to compare the complete part number and the main dimensions.
- How is a Y-bearing mounted in a split housing?
- The bearing is placed in the housing, the shaft is aligned and the set screws of the inner ring are tightened with the appropriate wrench. It is important to verify alignment and not strike the rings to avoid damage.