Product page
Mounting and maintenance tools SKF TMHS 75
- Manufacturer Part Number
- TMHS 75
- Brand
- SKFOfficial brand
- Category
- Mounting and maintenance tools
- Subcategory
- Mounting and maintenance tools
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF TMHS 75 is a mounting and maintenance tools reference, within Mounting and maintenance tools. Request a quote for TMHS 75 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF TMHS hydraulic spindle is a component that attaches to mechanical pullers to multiply extraction force. It is used when manual effort is not enough to remove bearings, pulleys, gears or other interference-fit parts. MR Accesorios Industriales carries this tool as part of its mounting and maintenance line, backed by more than 80 years in the industry.
The TMHS designation identifies the hydraulic spindle and the number that follows indicates the size or capacity. For example, TMHS 8-5, TMHS 75 and TMHS 100 cover different force ranges and thread dimensions to adapt to pullers of different sizes. When choosing, verify that the spindle thread matches that of the puller and that the pushing capacity is sufficient for the part to be extracted.
These tools are common in maintenance workshops, industrial plants, mining, oil & gas and transport in Argentina. They are used to remove large bearings, couplings, flywheels and pulleys where access is limited and controlled force is required. They are also useful in assembly tasks that require precise pushing without impacts.
For safe use, check that the spindle is in good condition, with no leaks or damaged threads. Lubricate the thread and the rod according to the manufacturer's instructions. Keep the spindle and the part aligned to avoid lateral forces. Force should be applied gradually; verify the maximum pressure allowed before operating.
SKF TMHS spindles are compatible with pullers of the same brand and with many equivalent systems from other brands, as long as thread, pitch and capacity match. When requesting a quote, provide the puller code or the thread dimensions to ensure interchangeability. Do not improvise adaptations that could compromise safety.
If you need a hydraulic spindle for your puller, write to us via WhatsApp with the TMHS code and the characteristics of your equipment. At MR Accesorios Industriales we advise you so you can choose the right model and coordinate the quote.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- How do I know which TMHS spindle model I need?
- You must verify the puller thread and the force required for extraction. Models TMHS 8-5, TMHS 75 and TMHS 100 cover different capacities. If you send us the puller code or the thread dimensions, we will help you select the compatible spindle.
- Can a TMHS spindle be used with pullers from other brands?
- Yes, as long as the thread and pitch match the puller. SKF TMHS spindles are compatible with many equivalent systems. It is essential to verify compatibility before use to avoid damage or accidents.
- What maintenance does the hydraulic spindle require?
- It is recommended to clean and lubricate the thread and the rod after each use, check for leaks and verify that there are no impacts or deformations. Follow the manufacturer's instructions for care and storage.