SKF TMFT 36/PRO bearing mounting tool
- Brand
- SKF
- Category
- Mounting and maintenance tools
- Subcategory
- Mounting and maintenance tools
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF TMFT 36/PRO is a reference of bearing mounting tool, within Mounting and maintenance tools. Request a quote for TMFT 36/PRO via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF TMFT mounting kit is a hand tool designed to install bearings by cold impact. It includes impact rings and a sleeve that allow the mounting force to be applied in a controlled way, preventing damage to the bearing and the shaft. It is a practical solution for maintenance factories that need to mount bearings without a hydraulic press, ensuring a correct and safe installation.
The designation TMFT …/PRO identifies SKF mounting kits. The letters TMFT correspond to the mounting tools category, the number that follows indicates the size or application range, and the suffix /PRO indicates the professional version of the kit. For example, the TMFT 36/PRO is a kit for a specific range of bearings. When requesting a quote, send the complete part number.
These kits are used in maintenance factories, industrial plants and rotating equipment repair services. They are common in industries such as food, cement, petrochemical and power generation, where bearings must be mounted precisely to avoid premature failures. In Argentina, they are common in preventive and corrective maintenance tasks on pumps, motors, fans and conveyors.
To select the right kit, take into account the type and size of the bearing to be mounted. The impact rings come in standardized sizes to fit different diameters. During mounting, make sure the force is applied to the ring that is fixed, never through the rolling elements. The sleeve allows safe striking. No additional lubrication is required, but the seat should be cleaned beforehand.
TMFT kits are compatible with bearings from various brands, as long as the dimensions match. If you need to replace any part, consult us: we can advise you on interchangeability and get the right spare part. MR Accesorios Industriales carries this line as part of its mounting tools catalogue.
Before mounting, check that the bearing and the shaft are clean and free of burrs. Apply a thin layer of lubricant to the seat to facilitate sliding. Strike with a nylon or rubber hammer on the impact ring, distributing the blows evenly around the ring. If you have doubts about the procedure, contact us by WhatsApp and we will send you the correct part number for your application.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the SKF TMFT mounting kit include?
- The kit includes impact rings of different sizes and a sleeve for cold impact mounting of bearings. The rings adapt to the bearing diameter and the sleeve allows the force to be applied in a controlled way. Everything comes in an organizer case to facilitate transport and use in the factory.
- Is it suitable for any type of bearing?
- It is designed for bearings that are cold impact mounted, generally deep groove ball bearings or roller bearings. It is not suitable for bearings that require mounting with a hydraulic press or heating. Check the type and size of your bearing before choosing the kit.
- How do I request the right kit for my application?
- Send us by WhatsApp the part number of the bearing you are going to mount and the working conditions. With that data we will recommend the TMFT kit that best suits you. We can also quote other SKF mounting tools if you need a more specific solution.