Product page
Screw puller SKF TMBS 100E-3
- Manufacturer Part Number
- TMBS 100E-3
- Brand
- SKFOfficial brand
- Category
- Mounting and maintenance tools
- Subcategory
- Mounting and maintenance tools
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF TMBS 100E-3 is a screw puller reference, within Mounting and maintenance tools. Request a quote for TMBS 100E-3 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF TMBS hydraulic puller is a jaw tool with a built-in hydraulic cylinder, designed to remove bearings, pulleys, gears and other interference-fit components. Hydraulic force allows extracting large or heavily seized parts with less manual effort and greater control than a conventional mechanical puller. MR Accesorios Industriales supplies this line, with technical advice to choose the right model for the application.
The TMBS designation is completed by a number indicating the pulling capacity and a suffix identifying the jaw variant or reach. For example, TMBS 50E-2, TMBS 100E-1 and TMBS 150E-5 show how the first number increases with available force and the second distinguishes configurations within that capacity. When requesting a quote, send the full code: this unambiguously identifies the exact model you need.
In Argentine industry, these pullers are used in plant maintenance, machinery repair shops, mining, cement, steel and rail transport. They are common for removing spherical roller bearings, rolling rings, pulleys and couplings on large equipment where a manual puller is not enough. They are also used on pumps, fans and gearboxes that require periodic interventions.
To select the model, consider the outside diameter of the part to be extracted, the grip depth and the space available around it. Check that the jaws rest on a firm surface and that the hydraulic cylinder has sufficient travel. Aligning the puller with the shaft is critical to avoid lateral loads. Lubricate the ram and check the condition of the jaws before each use.
SKF TMBS hydraulic pullers can be interchanged with other brands of equivalent performance, but jaw and thread dimensions do not always match. Do not invent equivalences based on similar codes: always compare technical specifications. At MR Accesorios Industriales we can guide you if you send us the original code and a photo of the assembly.
If you need a TMBS hydraulic puller, write to us on WhatsApp with the full code and the application. At MR Accesorios Industriales we advise you so you choose the correct model and we send you a quote with no obligation.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What is the difference between the TMBS 50E, 100E and 150E models?
- The number indicates the pulling capacity: the higher the number, the greater the available force. The suffix after the E distinguishes the jaw configuration or reach. To choose, consider the size of the part and the working space. Send us the full code and we will advise you.
- Is it suitable for removing spherical roller bearings?
- Yes, it is one of its typical applications. The jaws adapt to the outer ring or the raceway depending on the assembly. It is important to select the model with the right capacity and reach to avoid damaging the bearing or the shaft.
- How do I request a quote for an SKF TMBS puller?
- Write to us on WhatsApp with the full model code (for example, TMBS 100E-2) and tell us which part you need to extract. We will send you a quote shortly.