Product page
Automatic lubricator SKF TLSD 1-CAP
- Manufacturer Part Number
- TLSD 1-CAP
- Brand
- SKFOfficial brand
- Category
- Greases and lubrication
- Subcategory
- Greases and lubrication
![]()
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF TLSD 1-CAP is a automatic lubricator reference, within Greases and lubrication. Request a quote for TLSD 1-CAP via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF SYSTEM 24 TLSD automatic lubricator is a single-point electromechanical device that applies grease in a controlled and continuous way to bearings, linear guides, chains and other lubrication points. It mounts directly on the point or connects with a hose, and runs on a grease cartridge, a CAP cover and a BAT battery. It is a practical solution for hard-to-reach places or where manual lubrication cannot be done frequently.
The TLSD …-CAP designation identifies the lubricator and its configuration. TLSD is the category of SKF SYSTEM 24 electromechanical lubricators; the number that follows indicates the cartridge capacity (for example, 1 for 125 ml or 2 for 250 ml, depending on the variant). The CAP suffix indicates that the unit is supplied with the corresponding cover. In the examples, TLSD 1-CAP is a lubricator with a 125 ml cartridge and cover. To request a quote, send the complete part number shown on the label.
These lubricators are used in industries such as food, cement, mining, paper, steel and water treatment, among others. In Argentina they are commonly found in electric motors, pumps, fans, conveyors and textile machines, where access for greasing is limited or the equipment runs continuously. They are also chosen for applications where excess grease can be as harmful as a lack of it, because they allow the flow rate to be regulated.
To select the lubricator, take into account the type of grease required by the point (base, thickener, viscosity), the working temperature and the desired relubrication interval. The TLSD allows the discharge time and dose to be adjusted. When mounting it, make sure the thread or adapter is clean and properly tightened to avoid leaks. If you use a hose, keep it as short as possible and purge the air before starting up the unit.
SKF SYSTEM 24 lubricators are interchangeable with other automatic systems of similar capacity and operating principle, but always verify thread compatibility, working pressure and grease type before replacing one brand with another. At MR Accesorios Industriales we carry the SKF brand and can advise you on the best configuration for your equipment. Send the complete part number and we'll quote you.
If you need spare parts such as grease cartridges, CAP covers or BAT batteries, we can also supply them. Send the part number via WhatsApp to MR Accesorios Industriales and we'll reply with a quote. We have more than 80 years of experience in the field and we know the typical applications of each industry.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the TLSD 1-CAP lubricator include?
- The TLSD 1-CAP includes the lubricator body, a 125 ml grease cartridge and the CAP cover. The BAT battery is ordered separately. Verify the exact part number when making your inquiry so we can give you the correct configuration.
- Can the amount of grease delivered be regulated?
- Yes, the TLSD allows the discharge time and dose to be adjusted according to the requirement of the lubrication point. This is configured at start-up. Ask us if you need help defining the right frequency for your equipment.
- How do I request a quote?
- Send the complete part number of the lubricator or the spare part via WhatsApp to MR Accesorios Industriales. We'll reply with a quote. If you don't have the part number, tell us which equipment you want to lubricate and we'll help you identify it.

