Automatic lubricator SKF TLMP 1008/230V

SKF TLMP 1008/230V is a automatic lubricator reference, within Greases and lubrication. Request a quote for TLMP 1008/230V via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF TLMP multipoint automatic lubricator is an electromechanical unit that delivers lubricant from a central reservoir to several points on a machine, without manual intervention. Its pump runs on 230 V or 24 V DC power and can be configured with 1 to 8 outlets depending on system requirements. It is used to maintain constant dosing on equipment that runs continuously, where periodic manual greasing cannot reach all points or sustain the necessary frequency.

The TLMP series designation is organized by model and supply voltage. In the examples TLMP 1008/230V and TLMP 1018/230V, the first digits identify the unit variant and the 230V suffix indicates that the pump runs on 230 V alternating current. For other configurations, the suffix may be 24V, corresponding to direct current. The number of lubrication points is defined by the number of enabled outlets, which in this series ranges from 1 to 8. When requesting a quote, it is best to provide the complete part number as shown on the unit's nameplate.

This type of lubricator is chosen in industries where several greasing points are concentrated and difficult to access: food and beverage plants, cement plants, steel mills, paper mills, aggregate processing and packaging lines. It also appears on mobile mining and earthmoving equipment, where vibration and load make manual greasing difficult. In Argentina it is found on mills, conveyor belts, gearboxes, drag chains and bearing systems that must be lubricated regularly without stopping production.

To select the unit, take into account the number of points to be lubricated, the distance between the pump and the farthest point, the type of lubricant and the working temperature. The power supply must match the voltage available on the machine: 230 V AC or 24 V DC. Installation requires mounting the unit in a position accessible for refilling and inspection, with lines properly secured and no tight bend radii. Commissioning includes purging the system and verifying that each outlet delivers lubricant evenly.

As for equivalents, multipoint automatic lubricators from other brands can replace an SKF TLMP if the number of points, supply voltage, flow per outlet and lubricant type match. A similar part number is not enough: service conditions and connection compatibility must be compared. If the original unit is no longer available, a replacement with similar performance can be evaluated, but always verifying working pressure and volume per cycle.

If you need to replace an automatic lubricator or set up a multipoint system, send the complete unit part number by WhatsApp to MR Accesorios Industriales. With that information, the variant can be identified and an alternative compatible with your application can be offered.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.