Spherical plain bearing SKF SIKAC 8 M

SKF SIKAC 8 M is a spherical plain bearing reference, within Bearings. Request a quote for SIKAC 8 M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SKF SIKAC M rod end bearings are spherical plain bearings with a male threaded shank that allow oscillating movements and angular misalignment in mechanisms. They are used where force must be transmitted with freedom of rotation, such as controls, linkages and cylinders. MR Accesorios Industriales supplies this line as an official brand and helps you choose the correct size for your application.

The designation SIKAC identifies a rod end bearing with a male threaded shank and a self-lubricating cage. The number that follows indicates the diameter of the spherical bore: that is why the series ranges from SIKAC 5 M to SIKAC 18 M, covering a range of increasing sizes. The suffix M indicates metric thread on the shank. Each size has a specific part number: SIKAC 6 M, SIKAC 8 M, SIKAC 10 M, SIKAC 12 M, SIKAC 14 M and SIKAC 16 M are among the most requested. Send the complete part number to identify it without ambiguity.

These rod end bearings are used in linkages of agricultural machinery, clutch and accelerator controls, hydraulic and pneumatic cylinders, and steering mechanisms. They also appear in material handling equipment, automatic gates and adjustment systems. In Argentina you will find them in maintenance workshops, implement factories and process plants that need to replace worn joints without modifying the original design.

To select correctly, take into account the bore diameter, the thread type and the load direction. The rod end bearing works best with radial load and slow oscillation; if there is a strong axial load, it is better to evaluate another solution. Installation requires aligning the shank with the plane of movement and adjusting without forcing the rod end bearing. Periodic lubrication and sealing against dust and water extend service life. Check the radial clearance: if play appears, the joint has already completed its cycle.

SKF rod end bearings are interchangeable with other brands under the same standardized designations, but always verify diameter, thread pitch and direction of rotation. Not all series have the same tolerances or cage materials. If your machine has an equivalent rod end bearing, send us the old and new part numbers to compare. At MR Accesorios Industriales we advise you so the replacement is direct and safe.

If you need SIKAC M rod end bearings, write to us on WhatsApp with the exact part number and quantity. We will quote you promptly and coordinate delivery. MR Accesorios Industriales has more than 80 years supporting Argentine industry with bearings, power transmission and accessories.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.