SKF SAKAC 22 M spherical plain bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical plain bearings and rod ends
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF SAKAC 22 M is a reference of spherical plain bearing, within Bearings. Request a quote for SAKAC 22 M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF SAKAC M rod ends are spherical plain bearings with a male thread that allow oscillating motion and misalignment between shafts. They are used in mechanisms that require smooth rotation and angle compensation, such as controls, linkages and cylinders. Their design with a metal body and sliding surface makes them suitable for moderate loads in industrial and automotive applications. MR Accesorios Industriales sells this line.
The SAKAC M designation reads as follows: the letters SAKAC identify the series of rod ends with male thread and steel cage, and the final M indicates that the body has a surface treatment. The number that follows the base code corresponds to the nominal bore diameter in millimeters. The male thread is metric fine pitch, with standardized dimensions according to size.
These rod ends are used in steering linkages, hydraulic controls, pneumatic cylinders, automatic doors, packaging machines, tillage equipment and oscillating motion transmission systems. In Argentina, they are common in the metalworking, automotive and food sectors and in agricultural machinery manufacturing, where misalignments and vibrations must be absorbed without losing motion precision.
To select a SAKAC M rod end, take into account the bore diameter, the thread type (male or female) and the permissible oscillation angle. Assembly must ensure that the rod end works within its angular range, without forcing the joint. Lubrication is permanent in most cases, but in dusty or humid environments it is advisable to protect the area with additional seals. Alignment between the shank and the support is key to avoid premature wear.
As for equivalents, SKF SAKAC M rod ends can be interchanged with other brands that follow the same dimensional designation, such as the POS series or similar, as long as the bore diameter, thread type and main dimensions match. Not all brands use exactly the same nomenclature, so it is essential to verify the dimensions before replacing. MR Accesorios Industriales can advise you with the comparison of part numbers.
If you need to replace a SAKAC M rod end, send us the complete part number via WhatsApp. At MR Accesorios Industriales we quote you and help you identify the correct part for your application. We help you find the right solution.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the number in SAKAC 8 M mean?
- The number 8 indicates the bore diameter in millimeters. In SAKAC 8 M, the bore is 8 mm. The final letter M indicates the surface treatment of the body. The male thread is metric fine pitch, standardized for that size.
- Can SAKAC M rod ends be lubricated?
- Most SAKAC M rod ends have permanent lubrication and do not require maintenance. In applications with a lot of dirt or humidity, it is recommended to add seals or oil seals to protect the sliding surface and extend its service life.
- How do I know if a rod end from another brand is equivalent?
- Verify that the bore diameter, thread type (male or female), pitch and main dimensions match. Even if the designation is similar, there may be differences. Send the original part number via WhatsApp and we'll help you compare.