Product page
Inch deep groove ball bearing SKF RMS 16/C3/R899
- Manufacturer Part Number
- RMS 16/C3/R899
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Inch deep groove ball bearings
Other brands in this category
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF RMS 16/C3/R899 is a inch deep groove ball bearing reference, within Bearings. Request a quote for RMS 16/C3/R899 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF inch deep groove ball bearing, RMS series, is a component designed to support radial and axial loads in both directions. It is used in equipment where dimensions are in inches, such as imported machinery or specific production lines. MR Accesorios Industriales carries this official brand and advises you so you can choose the correct bearing for your application.
The RMS series designation is interpreted as follows: RMS indicates the deep groove ball bearing series with inch dimensions. The number that follows, as in RMS 16, identifies the size within the series. Suffixes provide additional information: /C3 indicates an internal radial clearance greater than standard, and /R899 may refer to an execution or tolerance variant. Knowing these codes allows you to order the exact replacement.
These bearings are used in industries such as food, woodworking, textile and in machine tools, where shafts and housings follow inch standards. They are also present in pumping, ventilation and power transmission equipment. In Argentina, they are commonly found in machinery imported from the United States or the United Kingdom, and in production lines that require replacements with inch dimensions.
To select correctly, verify the bore, outer diameter and width in inches, and the type of sealing required according to the environment. The internal clearance, such as that indicated by /C3, should be chosen based on temperature and fit conditions. During mounting, ensure proper alignment and correct lubrication; avoid striking the bearing and follow the manufacturer's recommendations for installation.
SKF bearings are interchangeable with those from other brands that follow the same inch dimensional standards. When looking for equivalents, compare not only the dimensions but also the internal clearance and the type of sealing. MR Accesorios Industriales can help you identify the right reference if you provide us with the original code or the dimensions of your bearing.
If you need a quote for an SKF inch deep groove ball bearing, write to us on WhatsApp. At MR Accesorios Industriales we reply with the alternatives for your equipment. Send us the complete code, such as RMS 16/C3/R899, or the dimensions in inches and we will advise you with no obligation.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the /C3 suffix mean on an SKF bearing?
- The /C3 suffix indicates an internal radial clearance greater than standard. It is used when the bearing will operate at elevated temperatures or with fits that require greater clearance. It is important to respect this specification to avoid premature failures.
- How do I identify whether my bearing is in inches?
- Inch bearings have dimensions that do not match the usual metric series. Measure the bore, outer diameter and width with a caliper and compare with conversion tables. If the measurements are in inches or fractions, it is that type.
- Can I replace an SKF bearing with another brand?
- Yes, as long as the other brand offers a bearing with the same dimensions, internal clearance and type of sealing. International standards guarantee dimensional interchangeability. Contact us with the original code and we will help you find the equivalent.