Sprockets and gears SKF PHS W132-1CH10,5-BSN140

SKF PHS W132-1CH10,5-BSN140 is a sprockets and gears reference, within Power transmission. Request a quote for PHS W132-1CH10,5-BSN140 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF sprocket from the PHS W line is a chain drive sprocket designed to be mounted on shafts and mesh with standard-pitch chains. It is used in equipment where motion and torque must be transmitted at a constant ratio, such as conveyors, machine tools and lifting systems. MR Accesorios Industriales carries this line as an official brand and helps you identify the exact part from the code stamped on the sprocket.

The designation of these sprockets combines letters and numbers that indicate the type of construction and the main dimensions. In the example code PHS W132-1CH10.5-BSN140, the initial part identifies the line and the outside or pitch diameter; the following numeric block indicates the number of teeth and the chain pitch; and the final suffix distinguishes the hub finish or the mounting type. To choose the correct replacement, always compare the full code stamped on the part with the one on your spare parts list.

These sprockets are found in packaging lines, belt and roller conveyors, food industry machinery, lifting equipment and drive systems in production plants. In Argentina, the sectors that use them most are food, metalworking and material handling, where the chain runs continuously and demands a wear-resistant sprocket. They also appear in older equipment that is still maintained with equivalent spare parts.

To select the sprocket, check the chain pitch, the number of teeth and the shaft diameter. Inspect the condition of the hub and the keyway, and confirm that the bore matches the shaft. During mounting, align the sprockets with each other and with the chain to avoid uneven wear; even slight misalignment shortens the service life of the chain and the bearings. Lubricate according to the chain type and working speed, and check tension after the first hours of operation.

When replacing, sprockets from other brands may appear with the same number of teeth and pitch, but with differences in the hub, material or heat treatment. Matching teeth is not enough: you must compare the full code and the bore and keyway dimensions. If you cannot find the same code, send us the measurements of the original sprocket and the chain characteristics, and we will help you identify the compatible alternative.

If you have the code of the SKF sprocket you need, write to us on WhatsApp and we will send you the quote. At MR Accesorios Industriales we work with power transmission lines and can guide you if the code is incomplete or if you need an equivalent part for your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.