Sprockets and gears SKF PHS P76-1BH8X44MMNSKW

SKF PHS P76-1BH8X44MMNSKW is a sprockets and gears reference, within Power transmission. Request a quote for PHS P76-1BH8X44MMNSKW via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF sprocket from the PHS line is a chain drive sprocket designed to be mounted on shafts and mesh with standardized-pitch chains. It is used in equipment where motion and torque must be transmitted at a constant ratio, such as conveyors, machine tools, pumps and lifting systems. MR Accesorios Industriales carries this line as part of its power transmission catalog, with advice to choose the correct configuration according to the chain pitch and the available shaft.

The PHS series designation is made up of several blocks. After the fixed letters comes the chain pitch and the number of strands; then, the type of bushing or hub and the bore diameter; further on, the fastening system and the material or treatment. A concrete example is PHS P76-1BH8X44MMNSKW: the block P76 indicates the pitch, 1 the number of strands, BH8 the type of bushing, 44MM the bore diameter in millimeters and NSKW the finish or fastening. Each suffix changes the mounting, so it is advisable to read them all before ordering.

These sprockets are seen in chain conveyors, packaging lines, woodworking machines, lifting equipment and low- and medium-speed transmissions. In the Argentine market they appear in food plants, cement plants, tanneries and metalworking shops, where the chain and sprocket work with dust, humidity or frequent washdowns. They are also used to replace worn sprockets on old machines, as long as the pitch and number of teeth match the existing chain.

To select correctly, first look at the chain pitch and the number of strands: they are not mixed. Then verify the bore diameter and the type of fastening, because that determines whether the sprocket is centered and free of axial play. Lubrication and alignment between sprocket and chain are key to its service life: slight misalignment accelerates wear on teeth and bushings. If the equipment works with a lot of dirt, evaluate protections or seals that prevent the chain from dragging particles.

Regarding equivalents, sprockets are compared by pitch, number of teeth, bore diameter and type of bushing, not by the manufacturer's code. A sprocket from another brand with the same geometry may work, but tolerances and material must be confirmed. MR Accesorios Industriales carries SKF as an official brand and can guide you if the original code is not available or if you need an alternative compatible with your chain.

If you already have the sprocket code, the chain pitch or a photo of the part, send it via WhatsApp to MR Accesorios Industriales. With that data the correct configuration can be identified and the quote prepared. You can also inquire about sprockets for keyed shafts, taper bushings or specific fastenings, and about custom sprockets within the PHS line.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.