Product page
Sprockets and gears SKF PHS DF142-1CZ10X18MMDKW
- Manufacturer Part Number
- PHS DF142-1CZ10X18MMDKW
- Brand
- SKFOfficial brand
- Category
- Power transmission
- Subcategory
- Sprockets and gears
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PHS DF142-1CZ10X18MMDKW is a sprockets and gears reference, within Power transmission. Request a quote for PHS DF142-1CZ10X18MMDKW via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF sprocket in the PHS DF line is a power transmission component that mounts on shafts to transmit motion through chains or timing belts. It is used in industrial machines where synchronization and positive drive are required. MR Accesorios Industriales carries this official brand and helps you identify the exact part from the code engraved on the product or on your equipment drawing.
The SKF PHS DF sprocket designation is read in blocks. The PHS prefix identifies the category of sprockets for chain or timing belt. It is followed by letters and numbers that indicate the type of finish, the pitch, the number of teeth and the bore diameter. For example, in PHS DF142-1CZ10X18MMDKW, the DF142 block indicates the series or size, the 1CZ may refer to single strand and bushing type, the 10X18MM indicates bore dimensions and the DKW suffix groups machining variants. To choose correctly, send us the full code exactly as it appears on the part.
These sprockets are used in packaging lines, belt and roller conveyors, machine tools, lifting equipment and transmission systems in food, chemical and metallurgical plants. In Argentina, you will find them in industrial plant maintenance, repair shops and machinery manufacturers that build their equipment with SKF components. The combination of treated steel and precise machining makes them suitable for continuous service with moderate loads and high chain speeds.
To select the correct sprocket, take into account the chain or belt pitch, the number of teeth, the shaft diameter and the type of fixing. Check that the bore and the keyway match the shaft. During assembly, align the pulleys or sprockets to avoid uneven wear and noise. Proper lubrication and periodic checking of chain tension extend service life. If the sprocket works in a dusty or humid environment, consider additional protection.
As for equivalents, SKF sprockets can be interchanged with other brands if pitch, number of teeth, bore diameter and bushing type match. It is not enough for the code to be similar: the critical dimensions must be compared. MR Accesorios Industriales carries SKF as an official brand and can advise you on alternatives available on the local market, always respecting your equipment specifications.
If you need to identify or replace an SKF PHS DF sprocket, send us the full code by WhatsApp to MR Accesorios Industriales. With that information we will send you the quote. We can also advise you if you have doubts about the designation or want to replace an existing part.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- How do I identify the code of my SKF PHS DF sprocket?
- Look for the code engraved on the side or on the product box. It usually includes the PHS DF prefix followed by numbers and letters that indicate pitch, teeth and bore. If you cannot find it, measure the pitch, count the teeth and the bore diameter, and send us that information.
- What does the DKW suffix in the designation mean?
- The DKW suffix groups machining and finish variants within the PHS DF line. It does not change the pitch or the number of teeth, but it does affect construction details such as the bushing type or the surface treatment. To confirm the equivalence, it is always best to compare the full code.
- Can I replace an SKF sprocket with another brand?
- Yes, if pitch, number of teeth, bore diameter and type of fixing match. Do not rely on the code alone: check the critical dimensions. MR Accesorios Industriales can help you compare alternatives and choose the right option for your equipment.