SKF PHS 180-1C60 sprockets and gears
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Sprockets and gears
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PHS 180-1C60 is a reference of sprockets and gears, within Power transmission. Request a quote for PHS 180-1C60 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF PHS series sprockets are toothed wheels for power transmission via chain. They are mounted on shafts and mesh with roller chains to transmit motion and torque in industrial machines. MR Accesorios Industriales supplies this line as a brand, backed in the industry. If you need to replace a worn sprocket or build a new drive, send us the code and we will quote you.
The designation PHS identifies SKF sprockets for chain. It is followed by a number that indicates the chain pitch: for example, PHS 50-3C72 corresponds to a pitch 50, while PHS 60-2C68 uses pitch 60. The number after the hyphen indicates the number of strands: 2 for two strands, 3 for three. The letter C indicates the type of hub or boss, and the final number is the number of teeth: 72, 76, 84, etc. Thus, PHS 50-3C95 is a pitch 50 sprocket, triple strand, with 95 teeth.
These sprockets are used in chain drives of industrial machines: conveyors, elevators, mills, mixers, food and beverage equipment, aggregate and cement processing plants. In Argentina you will find them in packaging lines, milling plants and material handling systems. The PHS series covers pitches and number of teeth for different transmission ratios and torque levels.
To select the correct sprocket, take into account the chain pitch, the number of strands and the number of teeth you need. Check the shaft diameter and the type of fixing (keyway, set screw or hub). Mounting requires aligning the sprockets and tensioning the chain according to the manufacturer's recommendations. Proper lubrication and periodic wear checks extend the life of the assembly. If the drive works with pulsating loads, check the service factor.
SKF PHS sprockets can be interchanged with those of other brands that follow the same standards for pitch and number of teeth. To find the equivalent, compare the pitch, the number of strands, the number of teeth and the hub dimensions. If you have the original code, we can help you identify the corresponding SKF reference.
To request a quote for your SKF PHS sprocket, send us the complete code via WhatsApp to MR Accesorios Industriales. If you do not have it at hand, send us the chain and shaft data and we will help you identify it.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the code PHS 50-3C72 mean?
- PHS indicates SKF sprocket for chain. The 50 is the chain pitch, the 3 is the number of strands, the C is the hub type and the 72 is the number of teeth. With that data you can search for the replacement or request a quote from us.
- How do I choose the right sprocket for my drive?
- You need the chain pitch, the number of strands and the number of teeth. Also the shaft diameter and the type of fixing. With that data we advise you so that the sprocket meshes correctly and transmits torque without problems.
- Are SKF PHS sprockets interchangeable with other brands?
- Yes, as long as the pitch, the number of strands, the number of teeth and the hub dimensions match. There is no universal code, but by comparing those parameters you can find the equivalent. If you send us the original code, we will help you identify it.