Product page
Sprockets and gears SKF PHS 140-1C54
- Manufacturer Part Number
- PHS 140-1C54
- Brand
- SKFOfficial brand
- Category
- Power transmission
- Subcategory
- Sprockets and gears
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PHS 140-1C54 is a sprockets and gears reference, within Power transmission. Request a quote for PHS 140-1C54 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
SKF PHS series sprockets are toothed wheels for power transmission by chain. They are mounted on shafts and mesh with roller chains to transmit motion and torque in industrial machines. MR Accesorios Industriales sells this line as official brand, with the backing of more than 80 years in the industry. If you need to replace a worn sprocket or build a new drive, send us the code and we will send you a quote.
The designation PHS identifies SKF sprockets for chain. It is followed by a number that indicates the chain pitch: for example, PHS 50-3C72 corresponds to a pitch 50, while PHS 60-2C68 uses pitch 60. The number after the hyphen indicates the number of strands: 2 for two strands, 3 for three. The letter C indicates the type of hub or boss, and the final number is the number of teeth: 72, 76, 84, etc. Thus, PHS 50-3C95 is a pitch 50, triple-strand sprocket with 95 teeth.
These sprockets are used in chain drives of industrial machines: conveyors, elevators, mills, mixers, food and beverage equipment, aggregate and cement processing plants. In Argentina you find them in packaging lines, milling plants and material handling systems. The PHS series covers pitches and numbers of teeth for different transmission ratios and torque levels.
To select the correct sprocket, take into account the chain pitch, the number of strands and the number of teeth you need. Verify the shaft diameter and the type of fixing (keyway, set screw or hub). Mounting requires aligning the sprockets and tensioning the chain according to the manufacturer's recommendations. Adequate lubrication and periodic wear checks extend the life of the assembly. If the drive operates with pulsating loads, check the service factor.
SKF PHS sprockets can be interchanged with those of other brands that follow the same standards for pitch and number of teeth. We do not invent codes: to find the equivalent, compare the pitch, number of strands, number of teeth and hub dimensions. If you have the original code, we can help you identify the corresponding SKF reference.
To request a quote for your SKF PHS sprocket, send us the full code on WhatsApp to MR Accesorios Industriales. If you do not have it at hand, give us the chain and shaft data and we will help you identify it.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the code PHS 50-3C72 mean?
- PHS indicates an SKF sprocket for chain. The 50 is the chain pitch, the 3 is the number of strands, the C is the hub type and the 72 is the number of teeth. With these data you can look for the replacement or ask us for a quote.
- How do I choose the right sprocket for my drive?
- You need the chain pitch, number of strands and number of teeth. Also the shaft diameter and fixing type. With these data we advise you so that the sprocket meshes correctly and transmits torque without problems.
- Are SKF PHS sprockets interchangeable with other brands?
- Yes, as long as the pitch, number of strands, number of teeth and hub dimensions match. There is no universal code, but by comparing those parameters you can find the equivalent. If you send us the original code, we help you identify it.