SKF PHG S14M-1540-115 timing belt

SKF PHG S14M-1540-115 is a reference of timing belt, within Power transmission. Request a quote for PHG S14M-1540-115 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF timing belts from the PHG line with S8M profile are power transmission elements that combine a high-strength rubber compound with tensile cords and molded teeth. They are used to synchronize shafts and transmit torque without slipping in a wide variety of industrial machines. MR Accesorios Industriales sells this line so you can replace worn belts or design new drives with reliable components.

The designation of these belts follows the pattern PHG S8M-480-20, where PHG identifies the high-performance line, S8M indicates the profile and 8 mm pitch, 480 is the pitch length in millimeters and 20 the width in millimeters. In other codes, the profile and pitch may vary as indicated in the code. Examples in the series include lengths and widths that vary according to the code. This nomenclature allows you to quickly identify the belt you need: you only have to read the code engraved on the old belt or measure the pitch and width with a caliper.

These belts are used in drives where synchronization is critical: machine tool shafts, pumps, compressors, packaging equipment, industrial printers and positioning systems. In Argentina you find them in food, textile, wood and automotive plants, as well as in maintenance workshops that replace imported belts. Their profile is common on metric-pitch pulleys, so they are a usual option for modernizing drives that originally used similar belts from other brands.

To select the correct belt, verify that the pitch and width match the pulley. The profile requires pulleys with a groove for the corresponding pitch. The pitch length must be compatible with the center distance and the number of teeth on the pulleys. During installation, ensure pulley alignment and adequate tension: a belt that is too tight accelerates bearing wear and a loose one can jump teeth. Follow the machine manufacturer's recommendations and check the condition of the cords and teeth before installing.

SKF PHG timing belts can be interchanged with belts from other brands that share the same profile and pitch. The key is to respect the pitch, width and tooth type dimensions. Not all belts with the same pitch have the same load capacity; therefore, when replacing, also compare the compound and construction. If you have doubts, consult us with the full code and we will help you find the right equivalent within our power transmission line.

MR Accesorios Industriales sells SKF timing belts. If you need a PHG belt for your equipment, send us the code via WhatsApp and we will quote you. We can also advise you on pulleys, tensioners and other transmission components so your machine runs smoothly again.