SKF PHG DB-T5-750-S150 polyurethane belt

SKF PHG DB-T5-750-S150 is a reference of polyurethane belt, within Power transmission. Request a quote for PHG DB-T5-750-S150 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF polyurethane belts from the PHG DB line are double-sided timing belts designed to transmit motion precisely in both directions of rotation. Their polyurethane body gives them resistance to abrasion and wear, and the teeth on both sides allow building drives with reverse pulleys or direction changes. They are used in equipment where synchronization and cleanliness are important. MR Accesorios Industriales sells them in Buenos Aires, Argentina.

The designation of these belts is read in blocks. PHG DB identifies the polyurethane double-sided category. Then comes the profile, for example T5 or T10, which defines the tooth shape. Then comes the length in millimeters, as in PHG DB-T5-620-S150 or PHG DB-T10-1350-S150. The suffix S150 indicates the belt width. Thus, the complete code tells you profile, length and width at a glance.

These belts are chosen in Argentine industries where synchronism and low contamination are required: packaging, dosing, printing, textile machines, medical and laboratory equipment, and automation in general. They also appear in parallel-shaft drives with idler pulleys that need teeth on both sides. Being made of polyurethane, they resist moderate oils and greases and work well in dusty or humid environments, always within the manufacturer's limits.

To select correctly, take into account the profile and pitch: T5 has a 5 mm pitch and T10 a 10 mm pitch. The length must match the center distance and the number of teeth on the pulleys. The S150 width is the one that appears in the codes of this series, so verify that the pulley accepts that width. During installation, align the pulleys and do not force the belt: it is installed without cutting tools and with the right tension. Lubrication does not apply, but avoid contact with aggressive solvents.

Polyurethane belts with T5 and T10 profiles are interchangeable between manufacturers if profile, pitch, length and width match. It is not enough for the code to look similar: you must compare the number of teeth and the type of toothing. If your machine uses a belt from another brand, send us the complete code and measurements, and from MR Accesorios Industriales we will help you find the equivalent within the SKF line.

To request a quote, send us the exact belt code via WhatsApp, for example PHG DB-T5-750-S150, or the profile, length and width measurements. With that data we will give you the alternative. We work with the SKF line and other power transmission brands, and we ship throughout the country from Buenos Aires, Argentina.