Timing belt SKF PHG DA-T10-1500-16

SKF PHG DA-T10-1500-16 is a timing belt reference, within Power transmission. Request a quote for PHG DA-T10-1500-16 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PHG DA-T timing belt is a power transmission component that combines the flexibility of a belt with the precision of a gear. Its metric toothing meshes with timing pulleys, preventing slippage and maintaining synchronization between shafts. It is used in applications where motion accuracy and a constant transmission ratio are critical, such as automation, printing, packaging and textile machinery. MR Accesorios Industriales carries this line as an official brand, with technical advice to choose the right size.

The PHG DA-T designation is read in parts: PHG identifies the SKF timing belt family, DA indicates the tooth type (metric profile), and T indicates the metric pitch series. The numbers that follow clarify the dimensions: in PHG DA-T5-815-18, the 5 is the pitch in millimeters, 815 the pitch length in millimeters and 18 the width in millimeters. In PHG DA-T10-1500-16, the pitch is 10 mm, the length 1500 mm and the width 16 mm. This logic makes it possible to quickly identify any size in the line.

These belts are used in industries that require synchronized and repeatable motion. In Argentina, we see them in packaging machines, industrial printers, cutting and engraving equipment, pick and place robots, and stepper motor drives. They are also found in the textile, ceramic and food industries, where cleanliness and precision are key. Since they do not require lubrication, they are suitable for environments where oil would be a problem. Their metric profile makes them common in machinery of European origin and in local automation developments.

To select a timing belt, take into account the pitch, the length and the width that your pulley accepts. Verify that the tooth profile matches that of the pulley: a T5 does not mesh with a T10 pulley. Pulley alignment is essential to avoid irregular wear and noise. Tension should be the one recommended by the machine manufacturer; a belt that is too tight accelerates bearing wear, and a loose one can skip teeth. It does not require lubrication, but it should be kept clean and protected from oils or aggressive chemicals.

As for equivalents, metric T5 and T10 timing belts are often interchangeable between brands that comply with ISO 13050 or equivalent standards. However, not all brands maintain exactly the same profile or tolerance, so it is important to verify compatibility with the pulley. If you need to replace a belt, the safest data is the complete code engraved on the back. MR Accesorios Industriales can help you identify the correct equivalent without inventing codes: send us a photo or the code and we will verify it.

To request a quote for your SKF PHG DA-T timing belt, send the complete code via WhatsApp to MR Accesorios Industriales. If you do not have it on hand, give us the pitch, length and width measurements, and the number of teeth on the pulley. With that data we will advise you so you receive the right belt. More than 80 years of experience in power transmission allow us to guide you in selection and installation.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.