SKF PHG C225X4-OE v-belt

SKF PHG C225X4-OE is a reference of v-belt, within Power transmission. Request a quote for PHG C225X4-OE via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF PHG line V-belts are power transmission components used to link pulleys and transfer motion between shafts. The C section and the classic type make them suitable for medium and high load applications, with one or several ribs depending on the code. MR Accesorios Industriales sells this line as part of its transmission range.

The PHG C...-OE designation reads as follows: PHG identifies the SKF V-belt family; the letter C indicates the section, which in this case is the classic C section; the number that follows the C (for example 90, 144 or 158) is associated with the length or the development of the belt; the X separates the number of ribs, which varies by code; and the OE suffix distinguishes a construction variant. Thus, a code such as PHG C144X12-OE corresponds to a classic C section belt with 12 ribs.

These belts are used in a wide variety of industrial equipment in Argentina: from machine tools and compressors to pumps, fans and conveyors. Their classic V profile makes them common in installations where power must be transmitted between pulleys with a certain center distance. Being multi-rib, they allow several individual belts to be replaced by a single piece, simplifying installation and reducing the risk of tension differences between ribs.

To correctly select a PHG C belt, take into account the section and the number of ribs your drive needs, as well as the right length according to the distance between pulleys. Check that the pulleys are aligned and in good condition, and that the tension is the one recommended by the equipment manufacturer. Lubrication does not apply to belts, but it is important to keep them free of oil, grease or dirt that could affect their performance. Careful installation extends the service life of the assembly.

As for equivalences and interchangeability, V-belts are identified by their section and standardized length, so a C section belt from one brand can replace another of the same designation and dimensions. However, to ensure correct operation, it is advisable to verify the actual measurements and the profile type before replacing. MR Accesorios Industriales sells the SKF brand, but it is always best to confirm compatibility with the exact code of the original belt.

If you need a quote for an SKF PHG C V-belt, the simplest thing is to send the complete code by WhatsApp to MR Accesorios Industriales. With that data we can identify the section, the type and the number of ribs, and give you a precise answer. We can also advise you if you have doubts about the equivalence with another brand or if you need help reading the designation of your current belt.