V-belt SKF PHG C144X12-OE

SKF PHG C144X12-OE is a v-belt reference, within Power transmission. Request a quote for PHG C144X12-OE via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF V-belts of the PHG line are power transmission components used to link pulleys and transfer motion between shafts. The C section and the classic type make them suitable for medium and high load applications, with one or several grooves depending on the code. MR Accesorios Industriales sells this line as part of its transmission offering, with more than 80 years of experience in the Argentine industrial market.

The PHG C…-OE designation is read as follows: PHG identifies the family of SKF V-belts; the letter C indicates the section, which in this case is the classic C section; the number that follows the C (for example 90, 144 or 158) is associated with the length or development of the belt; the X separates the number of grooves, which can be 3, 4, 5 or 12 depending on the case; and the OE suffix distinguishes a construction variant. Thus, a code like PHG C144X12-OE corresponds to a C section, classic belt with 12 grooves.

These belts are used in a wide variety of industrial equipment in Argentina: from machine tools and compressors to pumps, fans and conveyors. Their classic V profile makes them common in installations where power must be transmitted between pulleys with a certain center distance. Being multi-rib, they allow replacing several individual belts with a single piece, simplifying installation and reducing the risk of tension differences between grooves.

To correctly select a PHG C belt, take into account the section and the number of grooves that your transmission needs, as well as the adequate length according to the distance between pulleys. Verify that the pulleys are aligned and in good condition, and that the tension is the one recommended by the equipment manufacturer. Lubrication does not apply to belts, but it is important to keep them free of oil, grease or dirt that could affect their performance. Careful installation prolongs the service life of the assembly.

Regarding equivalences and interchangeability, V-belts are identified by their section and standardized length, so a C section belt from one brand can replace another with the same designation and dimensions. However, to ensure correct operation, it is advisable to verify the actual measurements and the profile type before replacing. MR Accesorios Industriales sells the SKF brand, but it is always convenient to confirm compatibility with the exact code of the original belt.

If you need to request a quote for an SKF PHG C V-belt, the simplest is to send the complete code via WhatsApp to MR Accesorios Industriales. With that data we can identify the section, the type and the number of grooves, and give you a precise answer. We can also advise you if you have doubts about the equivalence with another brand or if you need help reading the designation of your current belt.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.