Polyurethane belt SKF PHG AT10-1860-S150

SKF PHG AT10-1860-S150 is a polyurethane belt reference, within Power transmission. Request a quote for PHG AT10-1860-S150 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SKF polyurethane belts from the PHG line with AT profile are power transmission components for applications that demand precision and synchronism. Their polyurethane body, internally reinforced, gives them good resistance to abrasion and wear, and the AT10 profile with 10 mm pitch allows transmitting motion without slipping in equipment where positioning accuracy is key. MR Accesorios Industriales sells them in Buenos Aires, Argentina, and advises you on choosing the correct size for your equipment.

The designation of these belts is read in blocks. PHG identifies the polyurethane line; AT indicates the toothed profile, and the number that follows —for example, 5 or 10— is the pitch in millimeters. Then comes the length in millimeters (255, 610, 1000, 1280, 1480, 1860) and the suffix S150, which corresponds to the belt width. Thus, a code such as PHG AT10-1000-S150 is interpreted as AT10 profile, 10 mm pitch, 1000 mm length and S150 width. Series examples also include sizes such as PHG AT5-255-S150 and PHG AT10-1860-S150.

These belts are used in industries in Argentina where movements need to be synchronized: feeding of packaging lines, positioning in machine tools, internal transport of parts, driving of pumps and fans, and printing equipment. They also appear in the food and pharmaceutical sector, where polyurethane withstands cleaning well and does not shed particles. Because they do not stretch like a flat belt, they maintain the transmission ratio and avoid frequent adjustments.

To select the correct belt, take into account the profile and pitch required by the pulley, the length according to the center distance and the width according to the power to be transmitted. Polyurethane tolerates moderate temperatures and does not need lubrication, but it is advisable to verify pulley alignment and proper tension: a belt that is too tight accelerates bearing wear, and a loose one can skip teeth. Also check that there are no sharp edges or debris that could damage the teeth.

As for equivalences, polyurethane belts with AT profile are available from different brands under similar nomenclatures, but the pitch, width and type of reinforcement do not always match. Therefore, before replacing one belt with another from a different manufacturer, compare the complete designation and the actual dimensions. If you have doubts, send us the code engraved on the belt and the pulley measurements: at MR Accesorios Industriales we help you identify the right option.

To request a quote, write to us on WhatsApp with the complete belt code (for example, PHG AT10-1480-S150) or with the pitch, length and width measurements. With that data we can confirm the reference and give you a quick answer. MR Accesorios Industriales has more than 80 years in the industry and sells brands such as SKF in Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.