SKF PHG AA163 v-belt

SKF PHG AA163 is a reference of v-belt, within Power transmission. Request a quote for PHG AA163 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF PHG line V-belts with AA section and double V (hexagonal) type are power transmission elements designed to work on both sides. They are used in drives that require reversing the direction of rotation or transmitting motion to several pulleys from a single belt. MR Accesorios Industriales carries them in Buenos Aires, Argentina, and helps you choose the correct size for your application.

The designation of these belts combines letters and numbers: PHG identifies the SKF V-belt category, AA indicates the section and the double V (hexagonal) type, and the final number expresses the nominal length in inches. For example, PHG AA51, PHG AA55 or PHG AA102 correspond to AA section belts with different lengths. The numeric suffix does not indicate the exact development in millimeters, but a reference that correlates with the pitch length; to select, you must always verify the actual measurement with the complete code.

This type of belt is used in industries such as food, metallurgical, textile and plastics, where there are multiple transmissions or rotation reversers. They also appear in pumping, ventilation and compressor equipment that need to transmit power through pulleys with grooves on both sides. In Argentina, they are commonly found in production lines that require maintaining synchronization between several shafts, especially when space is limited and a compact solution is sought.

To correctly select a double V belt, take into account the section (AA in this case), the pitch length and the number of pulley grooves. Installation requires aligning the pulleys and tensioning the belt according to the manufacturer's recommendations to avoid premature wear. Lubrication does not apply to the belt, but keeping the pulleys clean and free of burrs is key. If the drive works in an environment with oil or dust, evaluate additional protections to extend service life.

Regarding equivalences, V-belts are identified by their section and length, and different brands may offer products with similar designations. However, it is not advisable to replace one belt with another just because the code matches: you must compare the section, the type (double V in this case) and the actual pitch length. If you have doubts, consult us with the original code and the pulley measurements to verify interchangeability.

To request a quote, send us via WhatsApp the exact code of the belt you need, for example PHG AA102, and the quantity. At MR Accesorios Industriales we reply promptly and send you the alternatives. We can also advise you on the appropriate section and type if you tell us the characteristics of your drive.