SKF PHG A19 v-belt
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PHG A19 is a reference of v-belt, within Power transmission. Request a quote for PHG A19 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF PHG line V-belt, section A, is an essential component for power transmission in industrial machinery. Its classic V profile ensures an efficient grip in grooved pulleys, transmitting motion between shafts smoothly and with low maintenance. It is used in a wide variety of equipment, from pumps and fans to compressors and machine tools. MR Accesorios Industriales sells this belt as part of its power transmission catalog.
The PHG A… designation is interpreted as follows: PHG identifies SKF's line of classic V-belts; the letter A corresponds to the cross section, which in this case is section A; and the number that follows indicates the nominal length of the belt in inches. For example, PHG A100 is a belt with section A and a length of 100 inches. Some codes include an X suffix followed by a number, which indicates the number of ribs in multi-rib belts.
SKF PHG section A V-belts are used in numerous industrial applications in Argentina. They are found in centrifugal pumps, fans, air compressors, machine tools, conveyors and process equipment in food, textile, chemical and metallurgical plants. Their classic profile makes them suitable for drives where a stable transmission ratio and the ability to absorb vibrations are required. They are also used in agricultural equipment and in low- and medium-power drive systems.
To correctly select a PHG section A belt, take into account the power to be transmitted, the rotation speed and the pulley diameter. It is essential to check pulley alignment and proper tension to avoid premature wear. Lubrication does not apply to the belt, but it is important to keep the pulleys clean and free of burrs. If the environment contains oil or dust, consider guards or covers. Installation must be done without forcing the belt onto the pulley, using suitable tools so as not to damage the cord.
As for equivalences, V-belts are identified by their section and length, so a PHG A100 belt can be interchanged with other brands that follow the same section A and 100-inch length designation, provided they meet the corresponding dimensional tolerances. However, each manufacturer may have slight variations in compound and construction, so it is recommended to verify compatibility with the original equipment. MR Accesorios Industriales offers alternatives from recognized brands to suit every need.
If you need a quote for an SKF PHG section A V-belt, send us the full code on WhatsApp. At MR Accesorios Industriales we advise you so you can find the right belt for your application. We continue to support Argentine industry with quality power transmission products.
Dimensions
- Section
- A
- Type
- Clásica
Frequently Asked Questions
- How do I identify the section of an SKF PHG V-belt?
- The section is indicated by a letter in the designation, such as the A in PHG A100. This letter defines the width and height of the profile. To confirm the section of your belt, check the code stamped on the back or measure the top width of the belt.
- What does the X3 or X4 suffix mean on a PHG belt?
- The X suffix followed by a number indicates that the belt is multi-rib, meaning it has several ribs in a single piece. For example, X3 corresponds to 3 ribs and X4 to 4 ribs. This allows more power to be transmitted in a reduced space.
- Are SKF PHG section A belts compatible with pulleys from other brands?
- Yes, as long as the pulleys have grooves with the profile corresponding to section A and standardized dimensions. Compatibility depends on the dimensional standard of the pulley and the belt. We recommend verifying the pulley profile before replacing the belt.