Timing belt SKF PHG 84-XL-S800

SKF PHG 84-XL-S800 is a timing belt reference, within Power transmission. Request a quote for PHG 84-XL-S800 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SKF PHG series timing belts with XL profile and S ending are toothed power transmission elements that mesh with pulleys of the same pitch to deliver synchronized motion without slipping. They are used when the drive ratio must remain exact and space is limited, such as in automation equipment, industrial printers, and positioning mechanisms. MR Accesorios Industriales offers this line as part of its power transmission range.

The designation of these belts is read in parts. PHG identifies the SKF timing belt family. The number that follows, as in PHG 44-XL-S400 or PHG 60-XL-S800, indicates the number of teeth in the profile. XL corresponds to the pitch and tooth profile, and the final letter S indicates a construction variant within the series. The number after the S, for example 400 or 800, refers to the belt width in hundredths of an inch. Thus, PHG 90-XL-S800 is an XL-profile belt with 90 teeth and 8 inches of width.

These belts are used in industries where synchronization and low backlash are required: automation, packaging, printing, textile, machine tools, and laboratory equipment. In Argentina they are found in precision conveyors, drive shafts, dosing systems, and indexing mechanisms. Their XL profile makes them suitable for light and medium drives, with small-diameter pulleys and exact drive ratios. They are also used in conditioning equipment and in special machines where space is limited.

To select correctly, take into account the number of teeth, the pitch, and the width required by your pulley. Check that the profile matches that of the pulley and that the belt length allows for the center distance. During installation, ensure pulley alignment to avoid uneven wear and noise. Tension must be the value recommended by the equipment manufacturer: a belt that is too tight overloads the bearings and a loose one jumps teeth. Periodically check the condition of the teeth and the presence of cracks.

SKF timing belts can be interchanged with other brands that use the same profile and pitch, as long as the number of teeth, width, and tooth type match. It is not enough for the length to be similar: the profile must be identical for it to mesh correctly. When replacing, compare the full designation and check whether the pulley accepts the new belt. At MR Accesorios Industriales we can advise you on the right equivalent according to your current belt part number.

If you need to replace an SKF PHG XL-S timing belt, send us the full part number shown on the belt or in your equipment manual. With that data we can identify the exact reference and provide a quote on WhatsApp. MR Accesorios Industriales offers this line as an official brand, backed by more than 80 years in the industrial sector.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.