Timing belt SKF PHG 244-L-S1800

SKF PHG 244-L-S1800 is a timing belt reference, within Power transmission. Request a quote for PHG 244-L-S1800 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SKF timing belts from the PHG series with L profile and S finish are power transmission elements that combine the flexibility of a belt with the precision of a gear. Their internal teeth mesh with timing pulleys, allowing motion to be transmitted without slipping and maintaining a constant transmission ratio. They are used in equipment where synchronization between shafts is critical, such as machine tools, industrial printers, compressors and positioning systems. MR Accesorios Industriales carries this line as an official brand, with technical advice to choose the right pitch and length.

The designation of these belts is read in blocks. PHG identifies the SKF timing belt family. The number that follows indicates the number of teeth or the pitch length depending on the series. The letter L defines the pitch (tooth profile), and the suffix S with a final number, as in PHG 67-L-S800 or PHG 150-L-S1800, indicates a construction or width variant. The examples PHG 124-L-S1800 and PHG 158-L-S1800 show how the length changes while keeping the same profile and finish. To interpret each code accurately, it is best to consult the series table.

These belts are used in industries that require synchronized and repeatable motion. In Argentina they are found in packaging lines, industrial sewing machines, printing equipment, screw compressors, metering pumps and automation systems. They are also used in the food sector, where cleanliness and the absence of lubrication are advantages over chains. Their L profile makes them suitable for low and medium power drives with pulleys of the corresponding pitch, provided the alignment and tension recommended by the manufacturer are respected.

To select a timing belt, you must verify the pitch, pitch length, width and number of teeth. Installation requires aligned pulleys and correct tension: a belt that is too tight overloads the bearings and a loose one jumps teeth. It does not stretch like a V-belt, so the center distance must allow installation without forcing. Lubrication does not apply, but keeping the drive clean and checking tooth wear does. In environments with oil or dust, consider guards or specific variants.

Timing belts are identified by pitch and length, and different brands offer equivalent profiles. When replacing a belt, the safest option is to use the same code or one that matches in pitch, length and width. It is not enough for the profile to be similar: small differences in pitch or number of teeth affect synchronization. If you cannot find the exact code, an alternative with the same critical dimensions can be evaluated. MR Accesorios Industriales can help you compare options within its transmission line.

If you need to replace an SKF PHG series timing belt, send the complete code via WhatsApp to MR Accesorios Industriales. With the belt and pulley data, the technical team guides you so that the quote is accurate and the right belt reaches your plant.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.