Taper bushings and components SKF PHF TBU2517X60MM

SKF PHF TBU2517X60MM is a taper bushings and components reference, within Power transmission. Request a quote for PHF TBU2517X60MM via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF taper bushing from the PHF TBU line is a fastening element that allows pulleys, gears, couplings and other components to be mounted on cylindrical shafts. Its tapered design ensures a firm, centered fit, making mounting and dismounting easier without damaging the shaft or the driven element. It is a reliable solution for power transmission in industrial machinery.

The designation PHF TBU…MM is interpreted as follows: PHF identifies the SKF taper bushing category; TBU indicates the bushing type (tapered with flange); the first four-digit number (for example, 2517 or 3535) defines the bushing size, where the first two digits correspond to the nominal shaft diameter in inches and the last two to the outer diameter in eighths of an inch; the suffix MM indicates that the bore is machined in millimeters. In the examples, PHF TBU2517X14MM has a 14 mm bore, while PHF TBU3535X90MM has a 90 mm bore. This nomenclature allows the required size to be identified quickly.

These bushings are used in a wide variety of industrial applications: mounting pulleys for belt drives, gears for gearboxes, flexible couplings, fans, pumps, conveyors and process equipment. In Argentina, they are common in the food, chemical, mining and cement industries and in water treatment plants. Their ability to transmit torque without slipping and their ease of mounting make them ideal for equipment that requires frequent maintenance or configuration changes.

To select the correct bushing, check the shaft diameter and the hub dimensions of the element to be mounted. The bushing must match the tapered bore of the hub and the shaft diameter. During mounting, clean and degrease the tapered surfaces, insert the bushing into the hub and then onto the shaft, and tighten the fastening screws uniformly and progressively until the recommended torque is reached. Correct alignment of the assembly is essential to avoid vibration and premature wear.

Regarding equivalences, SKF taper bushings from the PHF TBU line are interchangeable with bushings from other brands that follow the same dimensional standard (such as TB-type bushings or similar). However, always check the tolerances and the fastening system before replacing one bushing with another of a different brand. Interchangeability is determined by standardized dimensions, not by the manufacturer's part number. Contact us if you have doubts about compatibility.

To request a quote for the SKF PHF TBU taper bushing you need, simply send us the complete part number on WhatsApp. At MR Accesorios Industriales we advise you so you choose the correct size and we send you a quote with no obligation. Remember that we work with in-house manufacturing to give you the best solution in power transmission.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.