Roller chain SKF PHC 120H-1C/L-AG

SKF PHC 120H-1C/L-AG is a roller chain reference, within Power transmission. Request a quote for PHC 120H-1C/L-AG via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PHC H series roller chain is a high-pitch transmission chain, designed to withstand high loads and moderate speeds in industrial drives. It is used to transmit power between distant shafts, with a constant transmission ratio and long-lasting performance. MR Accesorios Industriales sells this line as an official brand, with technical advice to select the right model for your application.

The PHC series designation is read as follows: the number following PHC indicates the chain pitch in eighths of an inch. For example, PHC 50H-1C/L-AG corresponds to a pitch of 5/8", PHC 60H-1C/L-AG to 3/4", PHC 80H-1C/L-AG to 1", PHC 100H-1C/L-AG to 1 1/4", PHC 120H-1C/L-AG to 1 1/2" and PHC 140H-1C/L-AG to 1 3/4". The letter H indicates high-pitch chain, while the suffix 1C/L indicates single-strand chain with riveted pins and AG refers to the anti-corrosion surface treatment.

These chains are used in a wide variety of industries in Argentina, such as food, cement, mining, agricultural and manufacturing. They are common in drag conveyors, bucket elevators, mill drives, mixers, pumps and process equipment. Their robust construction makes them suitable for environments with dust, humidity or moderate temperatures, where reliable and low-maintenance transmission is required.

To correctly select a PHC H series chain, take into account the power to be transmitted, the rotation speed, the number of sprocket teeth and the center distance. It is essential to verify shaft alignment and proper tension to avoid premature wear. Lubrication must be as indicated by the manufacturer according to speed and load; in corrosive environments, the AG treatment helps extend service life. Perform periodic inspections to detect elongation or roller damage.

Regarding equivalences and interchangeability, high-pitch roller chains are manufactured under international standards that allow replacing a chain from one brand with another as long as the pitch, number of strands and type of finish match. However, it is advisable to verify critical dimensions and material quality, since there may be differences in fatigue and wear resistance. Always consult a specialist before mixing components from different sources.

If you need an SKF PHC H series roller chain, at MR Accesorios Industriales we advise you so you can choose the right model. Send us the complete part number on WhatsApp, for example PHC 80H-1C/L-AG, and we will quote you promptly. With more than 80 years of experience, we are your reliable partner in power transmission.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.