Roller chain SKF PHC 100-1SLRX5MTR

SKF PHC 100-1SLRX5MTR is a roller chain reference, within Power transmission. Request a quote for PHC 100-1SLRX5MTR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PHC series roller chain is a power transmission component designed to withstand high loads and moderate speeds in industrial environments. Its construction includes plates, pins and rollers that allow precise engagement with sprockets. The SLRX suffix indicates a surface treatment of plates and pins that improves wear and corrosion resistance, while MTR indicates manufacturing with controlled tolerances. It is used in transmission equipment requiring durability and low maintenance.

The PHC series designation is read step by step. The number following PHC indicates the chain pitch in eighths of an inch according to the ASA standard: for example, PHC 50 corresponds to a 5/8" pitch, PHC 60 to 3/4" and PHC 80 to 1". The dash and the following number (1, 2) indicate whether it is single or double strand. Then the suffixes SLRX and MTR appear: SLRX identifies a special treatment of plates and pins for greater wear resistance, and MTR indicates a manufacturing process with controlled dimensional tolerances. Thus, PHC 60-2SLRX5MTR is a 3/4" pitch, double strand chain with SLRX treatment and MTR tolerances.

These chains are used in a wide variety of industries in Argentina. They are common in the transmission of flour mills, food plant conveyor belts, road machinery, oilseed industry equipment and packaging lines. They also appear in the drive of pumps, compressors and industrial fans. Their ability to work in environments with dust, humidity or moderate temperatures makes them suitable for the agricultural, cement and petrochemical sectors. In all cases, they are selected by pitch, number of strands and required tensile strength.

To correctly select a PHC chain, take into account the pitch, the number of strands and the required length. The SLRX treatment provides protection against wear, but does not replace adequate lubrication: verify the type of lubricant according to speed and load. Sprocket alignment is critical to avoid irregular wear and noise. During assembly, ensure the tension is as recommended by the equipment manufacturer; an overly tight chain accelerates wear of bushings and rollers. Periodically check elongation and lubrication to extend service life.

Regarding equivalences, SKF PHC series chains with ASA designation are interchangeable with other brands that follow the same standard in terms of pitch and number of strands. However, the SLRX and MTR suffixes are specific to SKF and may not have an exact equivalent in other brands. If you need to replace an existing chain, the safest approach is to compare the pitch, the number of strands and the roller dimensions. Do not invent codes or assume that a suffix from another brand means the same. Always consult a specialist before substituting.

If you already have your chain code, send it by WhatsApp to MR Accesorios Industriales. We will quote the exact reference and advise you on lubrication and assembly. At MR we carry the SKF brand as part of our power transmission line, with more than 80 years of experience in the field. Write to us and we will respond shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.