Y-bearing (insert bearing) SKF PER.W208SPPB6

SKF PER.W208SPPB6 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.W208SPPB6 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF Y-bearing from the PER.W series is a sealed insert with an extended inner ring and set screws, designed to be mounted in split plummer block housings and take-up units. It is used in equipment where the shaft rotates and you need a unit that resists contamination and moderate loads. Its design allows it to be locked to the shaft without special machining and aligned easily. MR Accesorios Industriales supplies this line and advises you to choose the correct variant for your application.

The PER.W designation is read as a category of inserts with an extended inner ring and sealing. The numbers that follow, as in PER.W208SPPB5, indicate the bearing size: 208, 209 or 211 refer to the bore diameter and the section. The suffix SPPB indicates the type of shaft locking, with set screws on the extended inner ring. The final number, such as 5, 6 or 12 in PER.W208SPPB5, PER.W208SPPB6 or PER.W208SPPB12, identifies sealing or execution variants. With that data you can locate the exact part in the catalogue.

These bearings are used in belt conveyors, bucket elevators, mixers, mills, washing equipment and agricultural machinery. In Argentina they are common in food plants, cement plants, quarries and agro-industrial facilities, where dust and humidity shorten the life of conventional bearings. They also appear in industrial fans and process centrifugal pumps. The combination of sealing and set screw locking simplifies mounting on commercial shafts and reduces maintenance downtime.

To select the insert, verify the shaft diameter and the type of housing where it will be seated. The SPPB sealing protects against dust and splashes, but does not replace adequate lubrication: follow the frequency indicated by the manufacturer according to the working conditions. When mounting, clean the shaft and apply the set screw torque in a cross pattern. Verify the alignment of the housing to avoid parasitic axial loads. If the equipment operates with vibration, periodically check the tightness of the set screws and the condition of the seals.

Y-bearings from different brands share standardized dimensions, but suffixes and executions change between manufacturers. An insert with an extended ring and set screws from another brand may be interchangeable if the bore diameter, outside diameter and width match. However, verify the sealing type and clearance class, because they affect performance in contaminated environments. For replacements, the safest approach is to compare the complete designation and consult a specialist before installing an alternative.

If you have the code of the Y-bearing you need, send it on WhatsApp to MR Accesorios Industriales. We will confirm the variant and send you the quote. We can also help you identify the replacement if you only have the shaft and housing dimensions. Our technical team has more than 80 years of experience in power transmission and bearings, and works with leading brands to give you a reliable solution.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.