Y-bearing (insert bearing) SKF PER.W208HPPB16

SKF PER.W208HPPB16 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.W208HPPB16 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF Y-bearing of the PER.W HPPB series is an insert unit with extended inner ring and set screw locking system, designed to be mounted on shafts and housed in split plummer block or pillow block housings. It is used in equipment where a sealed, self-aligning unit with simple maintenance is needed. MR Accesorios Industriales supplies this line, with technical advice to choose the correct variant for your equipment.

The designation of this series combines letters that identify the unit type and its characteristics. PER.W indicates the Y-bearing with extended inner ring and set screw locking; HPPB indicates the sealing and mounting particularities. The numbers that appear between those letters correspond to the shaft diameter and the unit size. For example, PER.W208HPPB16 is a unit for a 40 mm shaft with suffix 16. It is always advisable to verify the complete part number before requesting an equivalence.

These bearings are used in conveyors, belts, elevators, mixers, fans and agricultural or food machinery. In Argentina they appear frequently in food and beverage plants, cold storage facilities, mills and material handling equipment, where the environment has dust, humidity or frequent washdowns. The sealed unit reduces the ingress of contaminants and allows mounting in standard housings, which simplifies replacement in the plant.

To choose correctly, look at the shaft diameter, the housing type and the working environment. The HPPB sealing is designed to retain grease and stop dust and water; if there are pressure washdowns, additional protection is advisable. During mounting, tighten the set screws on the shaft with the correct key and verify the housing alignment. Lubricate according to the duty cycle and check axial and radial clearance before starting the equipment.

Units of this type are interchangeable between manufacturers if the main dimensions match: shaft diameter, inner ring width, distance between mounting centers and sealing type. It is not enough for the part number to be similar. If you need to replace a unit, send us the complete part number and the shaft and housing measurements. At MR Accesorios Industriales we help you find the correct equivalence within the brands we supply.

If you have the part number PER.W208HPPB16 or any other variant of the series, send it via WhatsApp along with a photo of the housing and the shaft measurements. With that data we will quote the appropriate unit.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.